MDM3051S -DGP-DAP

MDM3051S -DGP-DAP
1 / 10 PagesView full catalog

MDM3051S -DGP-DAP

Product catalog summary
Brief Introduction
The MDM3051S series includes the DGP (Gauge Pressure Transmitter) and DAP (Absolute Pressure Transmitter) models, designed for measuring the level, density, and pressure of liquids, gases, and steam. They output a 4mA to 20mA DC HART signal and can be configured using RST375 or RSM100Modem.

Performance Specification
The transmitters have a basic error of ±0.075% and are suitable for a range of 0Pa to 40MPa. They feature a stainless steel 316L or Hastelloy diaphragm and silicone oil filling. Environmental temperature effects and long-term stability are specified, with negligible power effects.

Functional Specification
Pressure ranges vary by model, with adjustable limits. Zero settings can be adjusted within the measured range. The output is a 2-wire, 4mA to 20mA DC signal with HART protocol, and alarm currents are specified. The response time and environmental temperature ranges are detailed.

Installation
Power supply requirements are 24V DC, with specific load conditions. Electric connections use M20×1.5 cable sealing buckles, and process connections are NPT 1/4 and UNF 7/16″.

Physical Specification
The transmitters are made from stainless steel and aluminum alloy, with a weight of 3.3kg. They have an IP67 housing protection rating. Overpressure limits and EMC compliance are specified.

Model and Specification Code Table
Various codes define output, pressure range, diaphragm material, process connection, mounting bracket, display, and other features. The document provides a detailed table for selecting the appropriate model configuration.
See more

Catalog excerpts

MDM3051S -DGP-DAP-1

MDM3051S-DGP/DAP Intelligent Pressure Transmitter MICRO SENSOR CO.,LTD.

 Open the catalog to page 1
MDM3051S -DGP-DAP-2

MICRO SENSOR CO.,LTD http://www.microsensor.cn Address: No.18 Yingda Rd, Baoji, Shaan Xi, China, 721006 Tel: +86 0917 3600739/3600832 Fax: +86 917 3609977

 Open the catalog to page 2
MDM3051S -DGP-DAP-3

MDM3051S Intelligent PressureTransmitter Brief Introduction Bracket Installation Gauge Pressure Transmitter (DGP) Bracket Installation Absolute Pressure Transmitter (DAP) Measured media: gas, steam, liquid Measured range(with no shift): 0Pa~600Pa...40MPa Basic error: ±0.075% Diaphragm contacting with liquid: Stainless Steel 316L, Hast-alloy MDM3051S-DGP Bracket Installation Gauge Pressure Transmitter MDM3051S-DAP Bracket Installation Absolute Pressure Transmitter MDM3051S series Bracket Installation Gauge/Absolute Pressure Transmitter is used for level, density and pressure measurement of liquid,...

 Open the catalog to page 3
MDM3051S -DGP-DAP-4

MDM3051S Intelligent PressureTransmitterLong-term stability Range Code Power effect ±0.001% /10V (12V-42V DC), negligible. Pressure range limit The pressure is adjustable within the upper and lower limit. It is recommended to choose the range code with the lowest pressure range proportion to optimize the performance specification. MICRO SENSOR CO.,LTD - 4 - http://www.microsensor.cn Address: No.18 Yingda Rd, Baoji, Shaan Xi, China, 721006 Tel: +86 0917 3600739/3600832 Fax: +86 917 3609977

 Open the catalog to page 4
MDM3051S -DGP-DAP-5

MDM3051S Intelligent PressureTransmitter Zero setting The zero and pressure range could be adjust to any value within the measured rang in the table, only the calibrated range>Min. Range is valid. Mounting position effect The change of mounting position parallel to diaphragm could not influence the zero drift. If the angle between mounting position and diaphragm is over 90° , the zero drift is <0.4kPa which could be calibrated by zero setting. No effect on pressure range. Output 2- wire, 4mA~20mA DC, HART communication protocol, linearity or square root output optional. Output signal limit: Imin=3.9mA,...

 Open the catalog to page 5
MDM3051S -DGP-DAP-6

MDM3051S Intelligent PressureTransmitter Pressure range Address: No.18 Yingda Rd, Baoji, Shaan Xi, China, 721006 Tel: +86 0917 3600739/3600832 Fax: +86 917 3609977 EMC Please refer to next page “EMC table” 3 Installation Power and load condition Power supply: 24V DC, R<(Us-12V)/Imax (kQ) Imax=23mA Max. Voltage supply: 42V DC Min. Voltage supply: 12V DC, 15V DC(Backlit LCD display) Digital communication load resistance range: 230Q~600Q Electric Connection M20*1.5 cable sealing buckle, terminals are suitable for (0.5~2.5)mm2 wire. Process connection NPT 1/4 and UNF 7/16" female at both sides...

 Open the catalog to page 6
MDM3051S -DGP-DAP-7

MDM3051S Intelligent PressureTransmitter Nameplate: Stainless steel 304 Weight 3.3kg(not including LCD display, mounting support and process connection) Housing protection IP67 Note: (1) A degree: performance is normal within the technical standard range during testing. (2) B degree: During testing, the function or performance is lowered or lost temporarily, but it could be recovered by itself. Actual operation state, storage and data will keep the same. Outline Dimension Horizontal Piping Installation (front view) MICRO SENSOR CO.,LTD Horizontal Piping Installation (side view) http://www.microsensor.cn...

 Open the catalog to page 7
MDM3051S -DGP-DAP-8

MDM3051S Intelligent PressureTransmitter 5 Electric connection chart Internal grounding External grounding Shortcut interface Testing terminal Note: the function of shortcut interface is equal to signal terminal. MICRO SENSOR CO.,LTD http://www.microsensor.cn Address: No.18 Yingda Rd, Baoji, Shaan Xi, China, 721006 Tel: +86 0917 3600739/3600832 Fax: +86 917 3609977

 Open the catalog to page 8
MDM3051S -DGP-DAP-9

MDM3051S Intelligent PressureTransmitter6 Process connection instruction 7.Basic error micro differential pressure range A. . range is - 100 pa ~ 199 pa, the basic error of plus or minus 1%; B. range is - 200 pa ~ 499 pa, the basic error of plus or minus 0.5%; C. range is - 500 pa ~ 999 pa, the basic error of plus or minus 0.2%; D. range is 1000 pa range (i.e., 1 kpa) or more, the basic error of plus or minus 0.075%. 7 Model and Specification Code Table MICRO SENSOR CO.,LTD Address: No.18 Yingda Rd, Baoji, Shaan Xi, China, 721006 Tel: +86 0917 3600739/3600832 Fax: +86 917 3609977

 Open the catalog to page 9
MDM3051S -DGP-DAP-10

MDM3051S Intelligent PressureTransmitter Code A C Code Others Exd version with E Explosion-proof cable MDM3051S-DGP H 1C A N N N 1 N N The whole spec MICRO SENSOR CO.,LTD Address: No.18 Yingda Rd, Baoji, Shaan Xi, China, 721006 Tel: +86 0917 3600739/3600832 Fax: +86 917 3609977

 Open the catalog to page 10

All Micro Sensor Co.,Ltd catalogs and technical brochures

  1. tri-valve

    2  Pages

  2. MPM489WZ1

    3  Pages

  3. MPM6861G

    4  Pages

  4. M1500

    2  Pages

  5. MFE600

    24  Pages

  6. MPM484C

    3  Pages

  7. Flow Switch

    4  Pages

  8. Appendix 1151

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.