Micro Motion® Model 2200S
16Pages

Product Data Sheet PS-001094, Rev. F May 2015 Micro Motion® Model 2200S 2-Wire Transmitter with MVDTM Technology The Micro Motion® Model 2200S 2-wire transmitter enables the use of reliable and accurate Micro Motion Coriolis meters virtually anywhere in your plant. The 2-wire Coriolis meter delivers measurement accuracy, repeatability, and operational savings on a level not previously possible in loop-powered applications.  Replace existing 2-wire flow devices with minimal effort and without incurring additional power or cabling costs Wireless THUM™ option maximizes installation and operation flexibility Low energy, loop-powered design enables easy integration of Coriolis into existing processes for improved measurement and reduced maintenance for an even greater number of flow points Reduce the complexity and improve the performance of new process plants with looppowered mA output and HART protocol 2-wire Coriolis Compact, integral 2-wire transmitter design saves electrical cost and space for use on integrated systems and skids Direct mass measurement improves process control while reducing number of measurement devices required Accurate, repeatable measurement ensures higher quality production and overall improved proces

Model 2200S 2-Wire Transmitter with MVD™ Technology Micro Motion® 2-Wire Coriolis flow and density meter Utilizing Micro Motion MVD technology, the Micro Motion 2-wire Coriolis meter delivers multivariable and diagnostic information via HART® communications. Comprised of a cutting-edge Model 2200S transmitter and the proven best-in-class performance of a Micro Motion Coriolis meter, the Micro Motion 2-wire meter brings reduced costs through improved process consistency and maximized uptime. Micro Motion 2-wire Coriolis is ideally suited for use in the chemical, petrochemical and refining...

Model 2200S 2-Wire Transmitter with MVD™ Technology Applications The Micro Motion adapter-barrier provides Class I, Div. 1 and Zone 1 intrinsic safety protection, and re-spans the I/O signal from 12– 20 mA to 4–20 mA. Transmitter to host with no barrier Model 2200S mA receiving device 12–20 mA Transmitter to host with third-part barrier 3rd-party barrier mA receiving device 12–20 mA Safe area Hazardous area Transmitter to host with Micro Motion adapter-barrier Adapter-barrier mA receiving device 4–20 mA Safe area

Model 2200S 2-Wire Transmitter with MVD™ Technology Electrical connections Connection type Digital communications administrative connection One pair of wiring terminals for transmitter input/output, digital communications, and power. Screw terminals accept solid or stranded conductors, 26 to 14 AWG (0.14 to 2.5 mm2). Adapter-barrier Wire gauge: 0.2 mm2 (24 AWG) minimum, 2.5 mm2 (14 AWG) maximum Two clips on the display for a temporary connection to HART/Bell 202 terminals. Loop resistance is required on main terminals. Loop resistance must be present in the main I/O loop, but not physically...

Model 2200S 2-Wire Transmitter with MVD™ Technology Digital communications Transmitter output type HART Bell 202 Descriptions HART signal is superimposed on the milliamp output, and is available for host system interface:      Frequency: 1.2 and 2.2 kHz Amplitude: to 1.0 mA 1200 baud, one stop bit, odd parity Address: 0 (default), configurable Requires 250 to 600 W resistance Power supply Type Isolation voltage External power: 17–36 VDC Loop resistance up to 600  0.8 W maximum Power to field side: > 1500 VAC Power to host side: > 500 VAC Field to host side: > 1500 VAC 18–42 VDC...

Model 2200S 2-Wire Transmitter with MVD™ Technology Environmental effects EMI effects  Complies with EMC directive 2004/108/EC per EN 61326 Industrial Conforms to NAMUR NE21 Version: 08.22.2007 Ambient temperature effect On mA output: ±0.005% of span per °C Hazardous area classifications Model 2200S transmitter CSA C-US  ATEX Electronic option code H or K II 2D Ex ibD 21 T70 °C II 3G Ex nA II T4 II 3D Ex tD A22 IP66/67 T70 °C Electronic option code 5 or 6 (THUM adapter) (1) When installed in a suitable enc

Model 2200S 2-Wire Transmitter with MVD™ Technology Physical specifications Transmitter Specification NEMA 4X (IP66/67) polyurethane-painted cast aluminum or 316L stainless steel. Available with 1/2” NPT or M20 conduit connections See the sensor Product Data Sheet for combined weight of the flowmeter Cable gland entrances One 1/2”–NPT or M20 x1.5 female conduit port for output and power supply Integral-mount or extended-mount Available integrally mounted to Micro Motion ELITE and F-Series sensors The transmitter can be rotated on the mounting in 45° increments, for eight different...

Model 2200S 2-Wire Transmitter with MVD™ Technology Dimensions Transmitter Dimensions in Face view Side view

Model 2200S 2-Wire Transmitter with MVD™ Technology Front view

Model 2200S 2-Wire Transmitter with MVD™ Technology Ordering Information Product code structure for Model 2200S Transmitter base model Base model Model Product description Micro Motion Coriolis 2-wire MVD transmitter. Must be ordered with a sensor. Mounting Code Mounting options Integral mount transmitter, polyurethane-painted aluminum Integral mount transmitter, 316L stainless steel Not recommended for truck-mount Power Code Output options / power supply One 12-20 mA output with HART (loop power) One 12–20 mA output with HART (loop power), wireless HART (775 integrally mounted, order...

Model 2200S 2-Wire Transmitter with MVD™ Technology Conduit connections Code Conduit connection options 1/2-inch NPT with brass/nickel cable gland 1/2-inch NPT with stainless steel cable gland M20 with brass/nickel cable gland M20 with stainless steel cable gland Approvals Code Terminal options Micro Motion standard (no approval with CE/EAC markings) ATEX – Equipment Category 3 (Zone 2) ATEX – Equipment Category 2 (Zone 1) TIIS – Hardware ready County-specific approval – Requires a selection in the Add-on options table Available with only T and S approval codes Language Code Display and...