Catalogs >
Micro-Hybrid Electronic GmbH >
datasheet MTS2SENS200

datasheet MTS2SENS200
6Pages

Catalog excerpts

PRODUCT DATA SHEET MTS2SENS The thermo-electric IR detectors of the MTS series (Micro-Hybrid thermopile sensors) are characterized by a particularly high detectivity and durability. Spezialised to measure determined gases Backfilling with different gases to adapt performance for choosen target gas Reference channel PRODUCT DATA SHEET › IR detectors › MTS2 SENS | © Micro-Hybrid-Electronic GmbH | 2022-04 | All rights reserved. Excellent performance due to best materials like BiSb / Sb for thermoelectrical effect (MTS200) Best detectivity High sensitivity Medical technology: anesthesia equipment, patient monitoring Environmental engineering: monitoring CH4 in biogas plants Laboratory technology / bioengineering: measurement of CO2 and H2O in cell and tissue growth, C 2H5OH-detection Industrial process control: detecting SO2, NO, CO and other process relevant gases Safety technology / explosion protection: CO2-, CO-, CH4 - detection Additional product information The base of each thermopile detector is formed by the so-called thermocouple. Due to thermal diffusion currents of two different metals (Seebeck effect), it generates an electrical voltage – the measurement signal. These serially connected thermocouples, called thermopiles, achieve a higher output voltage. Online shop for IR components and sensors Filter products simply by selecting the desired properties and request your quotation. INFRARED COMPONENTS AND SYSTEMS The sensitive component of Micro-Hybrid thermopile detectors is a MEMS-based thin-layer system on a silicon substrate. We offer thermopile detectors with either 200 or 44 thermocouples for NDIR gas analysis.

Open the catalog to page 1

PRODUCT DATA SHEET › IR DETECTORS › MTS2SENS Technical data Technical parameter Active area Noise equivalent power NEP 1,2,3 Thermistor Filling gas 3 Filters PTC Ni1000, other on request: Technical specifications see document „Thermistors”. Kr, other on request See document „Infrared filters”, customized filters on request. Operating temperature T=500 K, E=38 W/m2, without influence of filter characteristic At Tamb = 25 °C 3 With Kr-filling, other gases on customer's request 1 2

Open the catalog to page 2

PRODUCT DATA SHEET › IR DETECTORS › MTS2SENS Typical operating characteristics Frequency response MTS44 with Kr backfill gas (RMS) Frequency response MTS200 with Kr backfill gas (RMS) Signal normalized Signal normalized

Open the catalog to page 3

PRODUCT DATA SHEET › IR DETECTORS › MTS2SENS Electrical schemata Circuits Equivalent circuit diagram

Open the catalog to page 4

PRODUCT DATA SHEET › IR DETECTORS › MTS2SENS Mechanical drawings Bottom

Open the catalog to page 5

PRODUCT DATA SHEET › IR DETECTORS › MTS2SENS Product overview Disclaimer All rights reserved. All information in this data sheet are based on latest knowledge, results of practical experience and tests carried out. Earlier specifications are hereby invalid. All specifications – technical included – are subject to change without notice. It is the customer’s responsibility to ensure that the performance of the product is suitable for customer’s specific application. No liability is accepted for indirect damage, in particular for the use or inability to use the product. Any liability we may...

Open the catalog to page 6

datasheet MTS2SENS200 6Pages

Catalog excerpts

All Micro-Hybrid Electronic GmbH catalogs and technical brochures

datasheet MTS2SENS200
6Pages