Catalogs >
Micro-Hybrid Electronic GmbH >
data sheet MTS1TEMP56

data sheet MTS1TEMP56
6Pages

Catalog excerpts

PRODUCT DATA SHEET One channel IR thermopile detector for industrial non-contact temperature measurement Applications Life science: non-contact temperature measurement of laboratory parameters. Chip with 56 p/n-doped Si thermocouples Integrated thermistor for reference temperature determination PRODUCT DATA SHEET › IR detectors › MTS1 TEMP56 | © Micro-Hybrid-Electronic GmbH | 2022-09 | All rights reserved. Product benefits Long service life Filter cut-on 5.5 µm TO46 housing Availability in high volumes > 50 000 p.a. Integrated temperature measurement Filter cut-on 5.5 µm optimized for non-contact temperature measurement in high-volume applications Good price/performance ratio Additional product information The base of each thermopile detector is formed by the so-called thermocouple. Due to thermal diffusion currents of two different metals (Seebeck effect), it generates an electrical voltage – the measurement signal. These serially connected thermocouples, called thermopiles, achieve a higher output voltage. Online shop for IR components and sensors Filter products simply by selecting the desired properties and request your quotation. INFRARED COMPONENTS AND SYSTEMS The sensitive component of Micro-Hybrid thermopile detectors is a MEMS-based thin-layer system on a silicon substrate.

Open the catalog to page 1

PRODUCT DATA SHEET › IR DETECTORS › MTS1TEMP56 Technical data Technical parameter Active area Noise equivalent power NEP 1,2,3 Operating temperature T=500 K, E=38 W/m2, without influence of filter characteristic At Tamb = 25 °C 3 With N2 -filling 1

Open the catalog to page 2

PRODUCT DATA SHEET › IR DETECTORS › MTS1TEMP56 Typical operating characteristics Output voltage at constant ambient temperature of 25 °C *measurement setup: diameter of surface blackbody 65 mm; distance blackbody to chip 46.1 mm Long wave pass filter with cut on at 5.5 µm 100

Open the catalog to page 3

PRODUCT DATA SHEET › IR DETECTORS › MTS1TEMP56 Electrical schemata Circuits Equivalent circuit dia

Open the catalog to page 4

PRODUCT DATA SHEET › IR DETECTORS › MTS1TEMP56 Mechanical drawings Bottom All geometrical dimensions in mm

Open the catalog to page 5

PRODUCT DATA SHEET › IR DETECTORS › MTS1TEMP56 Product overview Disclaimer All rights reserved. All information in this data sheet are based on latest knowledge, results of practical experience and tests carried out. Earlier specifications are hereby invalid. All specifications – technical included – are subject to change without notice. It is the customer’s responsibility to ensure that the performance of the product is suitable for customer’s specific application. No liability is accepted for indirect damage, in particular for the use or inability to use the product. Any liability we may...

Open the catalog to page 6

data sheet MTS1TEMP56 6Pages

Catalog excerpts

All Micro-Hybrid Electronic GmbH catalogs and technical brochures

data sheet MTS1TEMP56
6Pages