
Group: Micro-Epsilon

Catalog excerpts

More Precision capaNCDT // Capacitive displacement sensors and systems
Open the catalog to page 1
Measuring principle Measuring principle Guard ring Capacitor Field lines Measurement spot Measuring principle The principle of capacitive displacement measurement using the capaNCDT (capacitive Non-Contact Displacement Transducer) system is based on how an ideal plate-type capacitor operates. The two plate electrodes are represented by the sensor and the opposing measurement object. If a constant alternating current flows through the sensor capacitor, the amplitude of the alternating voltage on the sensor is proportional to the distance between the capacitor electrodes. The alternating...
Open the catalog to page 2
Capacitive sensors Cylindrical sensors, flat sensors High resolution measuring system capaNCDT 6500 Modular multi-channel measuring system capaNCDT 6200 Compact single channel system capaNCDT 6110 Sensor system for thickness measurement combiSENSOR Accessories / Technical Information Triaxial sensor design with active sensor cable Common capacitive sensor (coaxial) The completely triaxial sensor design is unique for capaNCDT sensors. The guard ring electrode, the grounding and the measurement electrode are located on the front edge of the sensor. The guard ring electrode ensure a homogenous...
Open the catalog to page 3
Cylindrical sensors with female connector connector side Sensor type Article No. connector side connector side connector side reduced 0.025 mm Measuring range connector side Temperature stability Temperature range Active measuring area Guard ring width Minimum target diameter Housing NiFe (magn.) NiFe (magn.) NiFe (magn.) NiFe (magn.) NiFe (magn.) FSO = Full Scale Output 1) Valid with reference controller, relates to standard measuring range 2) RMS value of the signal noise 3) Non condensing 4) Titanium version available 5) Sensor mounted in the mid of clamping area Measuring range...
Open the catalog to page 4
connector side connector side connector side Sensor type connector side connector side connector side Measuring range Temperature stability Temperature range Active measuring area Guard ring width Minimum target diameter NiFe (magn.) (non-magn.) NiFe (magn.) FSO = Full Scale Output 1) Valid with reference controller, relates to standard measuring range 2) RMS value of the signal noise 3) Non condensing 4) Titanium version available 5) Sensor mounted in the mid of clamping area Mounting cylindrical sensors All sensors can be installed as both freestanding and flush units. The sensors can be...
Open the catalog to page 5
connector side connector side connector side Sensor type Measuring range Temperature stability Temperature range Active measuring area Guard ring width Minimum target diameter Weight Material FSO = Full Scale Output 1) Valid with reference controller, relates to standard measuring range 2) RMS value of the signal noise 3) Non condensing 4) Titanium version available 5) Sensor mounted in the mid of clamping area
Open the catalog to page 6
Cylindrical sensors with thread and socket connector side connector side M24x1.5 connector side Sensor type Measuring range dynamic, 8.5 kHz approx. 10 nm Zero Temperature range Active measuring area Guard ring width Minimum target diameter Weight Material Housing NiFe (magn.) Distance from the sensor surface for the recommended mounting option FSO = Full Scale Output 1) Valid with reference controller, relates to standard measuring range 2) RMS value of the signal noise 3) from more than +140°C: non-linear signal drift 4) with recommended mounting option 5) non-condensing Installing threa
Open the catalog to page 7
Cylindrical sensors with integrated cable clamp area clamp area clamp area clamp area clamp area Sensor type Measuring range static 2 Hz 0.15 nm dynamic 8.5 kHz 4 nm Zero 5) -19 nm/K Temperature stability Temperature range Humidity Dimensions 4) Active measuring area Guard ring width Minimum target diameter Weight (incl. cable and connector) Material Connection Cable integrated Ø2.1 mm×1.4 m axial FSO = Full Scale Output CSH Sensors are matched to controller with standard cable length 1) Valid with reference controller, relates to standard measuring range 2) RMS value of the signal noise 3)...
Open the catalog to page 8
Flat sensors with connector sensor structures Sensor type Measuring range Temperature range Temperature stability Dimensions (without housing) Active measuring area Guard ring width Minimum target diameter Sensor width + measuring range on both sides 2) RMS value of the signal noise 3) Valid with controller DT6530 4) Non condensing 1)
Open the catalog to page 9
reduced 0.1 mm Measuring range Temperature stability Temperature range Active measuring area Guard ring width Minimum target diameter Weight (incl. cable and connector) Material Connection Mounting Cable integrated Ø2.1 mm×1.4 m radial FSO = Full Scale Output CSH Sensors are matched to controller with standard cable length 1) Valid with reference controller, relates to standard measuring range 2) RMS value of the signal noise 3) Non condensing 4) Without cable, bend protection and crimp 5) In the case of a sensor mounting on the top or underside Mounting flat sensors The flat sensors are...
Open the catalog to page 10
Flat sensors with integrated cable reduced 0.6 mm Measuring range 0.07 % FSO static 2 Hz 0.9 nm dynamic 8.5 kHz 24 nm Zero 5) -37.6 or 2.4 nm/°C Temperature stability Temperature range Active measuring area Guard ring width Minimum target diameter Weight (incl. cable and connector) Material Connection Mounting Housing 1.4104 (magn.) Cable integrated Ø2.1 mm×1.4 m radial 2x screw M2 DIN 84A FSO = Full Scale Output CSH Sensors are matched to controller with standard cable length 1) Valid with reference controller, relates to standard measuring range 2) RMS value of the signal noise 3) Non...
Open the catalog to page 11
High resolution measuring system - ulti-channel system with subM nanometer precision resolution - Virtually independent of temperature - Also measures against insulators - As benchtop unit and as card carrier for a 19-inch format - Integrated calculation function for thickness measurements - Numerous filters, averaging, trigger functions, measured value storage, digital linearization System design The capaNCDT 6500 can be used for multi-channel operation and is modular in its design. Up to eight sensors can be connected to the signal conditioning electronics (Euro-size cards) via a...
Open the catalog to page 12All MICRO-EPSILON catalogs and technical brochures
-
Industrial Endoscopes
32 Pages
-
Optical precision micrometers
20 Pages
-
Surface Finishing
8 Pages
-
Plastics Industry
16 Pages
-
Wood & Furniture Industries
12 Pages
-
Wind Turbines
8 Pages
-
Telescopic Supports & Booms
8 Pages
-
Semiconductor Industry
8 Pages
-
Optics
8 Pages
-
Metal Industry
8 Pages
-
Machine Tools
16 Pages
-
Glass Industry
12 Pages
-
Electronics Production
12 Pages
-
Automotive Production
20 Pages
-
Inspection Systems
36 Pages