More Precision 3D sensors for precise inline quality inspection

Precise raw data for integrators and image processors 3D SDK at a glance: ■ GigE Vision / GenICam compatible ■ Access to all sensor parameters The 3D sensors from Micro-Epsilon are used for a variety of measurement and inspection tasks on both matt and shiny surfaces. The results can be documented and compared. This allows for important conclusions to be drawn for process improvements. All 3D inspection systems from Micro-Epsilon can be used in offline applications as well as in fully automated operation and on the robot. 3D sensors from Micro-Epsilon are equipped with a user-friendly SDK (Software...

Powerful software for 3D measurement tasks 3DInspect The Industrial Performance Unit is a powerful computing platform for the efficient commissioning of MicroEpsilon 3D sensors. The Industrial Performance Unit directly processes three-dimensional data, which is subsequently evaluated and assessed via the 3DInspect software. Results can be output via the integrated EtherCAT, RPOFINET and EtherNet/IP interfaces. 3DInspect is a uniform and user-friendly software tool for all 3D sensors from Micro-Epsilon. Parameter setting of the 3D sensors and recording of the measurement data are done directly...

Software for 3D measurement and inspection tasks 3DInspect Intuitive user interface Real 3D evaluation, not just 2.5D Object extraction in 3D Direct feedback with algorithms Compatible with all 3D sensors from Micro-Epsilon The 3DInspect software is a powerful tool for sensor parameter set up and industrial measurement tasks. This software transmits the measurement data from the sensor via Ethernet and provides the data in three-dimensional form. This 3D data is further processed, evaluated and assessed with 3DInspect measuring programs on the PC and, if necessary, logged and transmitted via...

Data preprocessing With data preprocessing, the point cloud can be adjusted before evaluation. This enables, for example, the correction of moving components, so that the point cloud for the evaluation is always in the same position. In addition, it is possible to refine the point cloud before evaluation, to apply filters to highlight features, to cut away irrelevant points or to set sections. Automatic alignment of the point cloud Setting cuts Data evaluation For data analysis, numerous programs are available to locate and measure characteristics. These can be edges, spheres or holes, for example....

■ Laser scanners for 3D profile measurement Compact size High lateral resolution from 7.8 um Small and compact, ideal for robotic applications Available with red and blue laser line GigE Vision standard - easy to integrate into common image processing software scanCONTROL laser line scanners use the laser triangulation principle for two-dimensional profile detection on different target surfaces. Line optics project a laser line onto the target surface. A high-quality optical system images the diffusely reflected light from this laser line onto a sensor matrix. From this camera image, the controller...

LLT30x0-25 LLT30x0-50 LLT30x0-100 LLT30x0-200 Available laser type Red Laser Blue Laser Red Laser Blue Laser Red Laser Blue Laser Red Laser x-axis z-axis Extended measuring range Start of measuring range 77.5 mm 105 mm 200 mm 200 mm Measuring range 1) Based on the measuring range; measuring object: Micro-Epsilon standard object 2) According to a one-time averaging over the measuring field (2,048 points) 3 RS422 interface, programmable either as serial interface or as input for triggering/synchronization End measuring range Z (extended)

Laser scanners for 3D profile measurement x-axis z-axis Available laser type Measuring range Extended measuring range Start of measuring range End of measuring range Height of measuring range Start of measuring range 1) Based on the measuring range; measuring object: Micro-Epsilon standard object 2) According to a one-time averaging over the measuring field (2,048 points) 3) RS422 interface, programmable either as serial interface or as input for triggering/synchronization

■ Profile stitching for up to 2 laser scanners Profile stitching with up to to two scanCONTROL laser scanners Integration in GigE Vision as raw data provider • ' > Industrial Ethernet connection for control and transmission of measured values Evaluation of composite 2D sections or 3D point clouds Compatible with scanCONTROL 30xx

The 3D Profile Unit enables the calculation of several individual profiles 3D Profile Unit Controller of scanCONTROL 30xx sensors in a common coordinate system. Communication with any GigE Vision clients This is how a composite 2D profile or a composite 3D point cloud Direct integration into image processing software can be generated. It enables the detection of various geometries, Transfer of profile data or 3D point clouds the extension of measuring ranges and the performance of thickness measurements. 3D Profile Unit Controller with Industrial Ethernet Integrated evaluation The evaluation...

High precision 3D sensors for inline shape and surface inspection surfaceCONTROL 3D 3500 Highest repeatability up to 0.25 µm Best Z-axis resolution from 0.7 µm Up to 2.2 million 3D points / second Easy integration in all common 3D image processing packets The new generation of high precision inline 3D measurements The high precision 3D snapshot sensor surfaceCONTROL 3D 3500 sensor is ideally suited to automated inline inspection of geometry, shapes and surfaces on diffuse reflecting surfaces. The sensor works according to the principle of fringe projection, which allows direct 3D measurement....

1) Measured on measuring object with cooperative surface in the center of the measurement area while the EnhancedSNR parameter is enabled and a 3x3 mean value filter is used once at a consistent room temperature of (20 ± 1 °C). 2) Duration that the sensor requires for the image acquisition of the pattern projections (without processing and evaluation time). 3) Applies for exposure times < 6,800 is 4) Connection via 2D/3D gateway interface module 5 Max. permissible operating temperature depends on installation scenario, connection and operating mode. In combination with a ventilation unit (art....