Catalogs >
Micro Crystal >
SCOCXOH

SCOCXOH
3Pages

Catalog excerpts

family package DIL 14 HC-MOS output 10 to 120 MHz DIMENSIONS Package: Pin out Pin 1 = Voltage control Pin 7 = GND Pin 8 = Fout Pin 14 = Vdd RoHScompliant: Oven control quartz crystal oscillator Fundamental mode frequency High shock and vibration resistance Wide temperature range Low aging Customer specification on request Very fast warm up Low power consumption Swiss made quality DESCRIPTION: This DIL 14 package has been specially designed for the applications: - Digital switching - Telecom transmission - Sonet / SDH / DWDM / FDM/36 / WIMAX - Airbone equipments - Battery operated systems - Instrumentation - Radio Transceiver The OCXO are supplied on trays (50 pcs/tray). Frequency versus temperature A: 0 to +60°C B: -20 to +70°C C: -40 to +85°C Frequency long term aging 1) long term aging 10 years long term aging 1st year Supply voltage Input current Output signal sine wave Symmetry at Vdd/2 Rise & fall time (without load) Level "0" & "1" Load min / max Start-up time Frequency stability versus load ± 10% 1) <± 1 E-9 / day after 30 days operating Phase noise typical Static conditions BW = 1Hz Stability versus Vdd Short term stability 0.1 to 30s 5E-11 typ at 1s Frequency control range see table 3 see table 1 (without air flow)

Open the catalog to page 1

Operating Temperature range Version high stability Operating Temperature range Version high stability start-up current at 25°C ≤ 300mA duration Frequency control adjustment response slope positive Voltage control input impedance > 47kΩ Resistor control R connect pin 1 to ground (Input impedance > -4,7kΩ) Micro Crystal AG Mühlestrasse 14 CH-2540 Grenchen Switzerland

Open the catalog to page 2

STANDARD FREQUENCIES: Other frequencies from 10 MHz up to 120 MHz on request Storage temp. range Vibration resistance Shocks resistance Package SMD version option D1 or D2 see application note Dil 14.4 pins GND to case height = 8mm PRODUCT DESCRIPTION AND ORDERING INFORMATION: T = high stability blank = standard stability A B C X R1 = R = 0 to 10kΩ V3 = Vc = 0 to 3.3V V5 = Vc = 0.5 to 5V YA internal accuracy= ± 1ppm YB internal accuracy= ± 0.5ppm Y = custom Frequency A unique part number will be generated for each product specification, i.e: 20xxxx-EA00 (in ESD plastic tray) Please contact...

Open the catalog to page 3