Package: Bottom view 100% Leadfree, RoHScompliant: SMT Clock oscillator in ceramic package Fundamental quartz mode frequency High shock and vibration resistance Wide temperature range Low aging Ultra low MSL Very fast start-up Excellent solderability Swiss made quality Customer specification on request Frequency stability included 1000h at Tmax ELECTRICAL CHARACTERISTICS AT +25°C DESCRIPTION: This SMD oscillator in ceramic package has been specially designed for surface mount using infrared, vapor phase or epoxy techniques. Applications: - Downhole and Well drilling equipments - Avionics - Airbone equipments - Geothermal equipments - Fire fighter equipments The MCSO2's are supplied on trays (128 pcs / tray) For pick-and-place equipment, the parts are available in 12mm tapes with 250 parts min 1000 parts min Frequency stability Over temperature range C = -55 to +125°C (see ordering info) Including 2)* Frequency stability Over temperature range E = -55 to +150°C (see ordering info) Including 2)* Frequency stability Over temperature range D = -55 to +175°C (see ordering info) Including 2)* Frequency stability Over temperature range G = -55 to +210°C (see ordering info) Including 2)* Supply voltage ± 5% Input current Output signal Symmetry at Vdd/2 Rise & fall time ≤ 20MHz For F=32.768 kHz rise & fall time ≤ 150ns (load 15pf 20% to 80%) Rise & fall time ≥ 20MHz for (load 15pf 10% to 90%) Level "0" & "1" Start-up time see table 1 HC-MOS compatible * 1) C = 47nF ceramic must be connected between GND & Vdd Operable over 2.3 to 5.5V * 2) adjustment at +25°C, long term aging 1000h at Tmax ordered over supply volt

blank =Vdd = 5V STANDARD FREQUENCIES: Other frequencies from 10 kHz up to 100MHz on request ENVIRONMENTAL Storage temp. range Vibration resistance Shocks resistance Reflow soldering Terminations option T3 on request (not available on G temperature range) with tinned Ag/Cu/Zn Pin 1 open → Pin 3 Clock H → Clock L → Low E/D option 1 on request Reaction time ˂ 1μs - No power E/D function (pin 1) before Vdd is setting on - E/D option not available for F ˂ 500 kHz - E/D option on request (very low consumption in disable mode). PRODUCT DESCRIPTION AND ORDERING INFORMATION: option 1 E/D enable / disable...