Catalogs >
Micro Crystal >
MCSO1E

MCSO1E
2Pages

Catalog excerpts

MCSO1E family package 8×4 mm T range up to 210°C DIMENSIONS Package: Bottom view Frequency stability included 1000h at Tmax ELECTRICAL CHARACTERISTICS AT +25°C pin 1 E/D pin 2 GND pin 3 Fout pin 4 Vdd All dimensions in mm typical 100% Leadfree, RoHScompliant: SMT Clock oscillator in ceramic package Fundamental quartz mode frequency High shock and vibration resistance Wide temperature range Low aging Ultra low MSL Very fast start-up Excellent solderability Swiss made quality Customer specification on request DESCRIPTION: This SMD oscillator in ceramic package has been specially designed for surface mount using infrared, vapor phase or epoxy techniques. Applications: - Downhole and Well drilling equipments - Avionics - Airbone equipments - Geothermal equipments - Fire fighter equipments The MCSO1's are supplied on trays (91 pcs / tray) For pick-and-place equipment, the parts are available in 16mm tapes with 250 parts min 1000 parts max Frequency stability Over temperature range C = -55 to +125°C (see ordering info) Including 2)* Frequency stability Over temperature range E = -55 to +150°C (see ordering info) Including 2)* Frequency stability Over temperature range D = -55 to +175°C (see ordering info) Including 2)* Frequency stability Over temperature range G = -55 to +210°C (see ordering info) Including 2)* Supply voltage ± 5% Input current Output signal HC-MOS compatible Symmetry at Vdd/2 Rise & fall time ≤ 20MHz For F=32.768 kHz rise & fall time ≤ 150ns (load 15pf 20% to 80%) Start-up time Load min / max Rise & fall time ≥ 20MHz for (load 15pf 10% to 90%) * 1) C = 47nF ceramic must be connected between GND & Vdd Operable over 2.3 to 5.5V * 2) adjustment at +25°C, long term aging 1000h at Tmax ordered over supply volt

Open the catalog to page 1

Table 1: Idd (Without load) STANDARD FREQUENCIES: Other frequencies from 32 kHz up to 100 MHz on request ENVIRONMENTAL Storage temp. range Vibration resistance Shocks resistance Reflow soldering Lids (standard) Ceramic Height 2.5mm type MCSO1EC Terminations option T3 on request (not available on G temperature range) with tinned Ag/Cu/Zn Pin 1 open → Pin 3 Clock H → Clock L → Low E/D option 1 on request Reaction time ˂ 1μs - No power E/D function (pin 1) before Vdd is setting on - E/D option not available for F ˂ 500 kHz - E/D option on request (very low consumption in disable mode). PRODUCT...

Open the catalog to page 2