Catalogs >
MICRO-CONTROLE / Spectra-Physics >
UV-Curing Epoxy Adhesives, Universal Cable Clamp

UV-Curing Epoxy Adhesives, Universal Cable Clamp
1Pages

Catalog excerpts

UV-Curing Epoxy Adhesives, Universal Cable Clamp - 1

408 Phone: 1-800-222-6440 • Fax: 1-949-253-1680 P h o t o n i c s a n d I n s t r u m e n t a t i o n POLARIZATION MEASUREMENT AND CONTROL OPTICAL FIBERS FIBER OPTIC COMPONENTS LASER DIODE MOUNTS LASER DIODE CONTROL AND ACCESSORIES EDUCATIONAL KITS Universal Cable Clamp Model F-CC Cable Clamp is a convenient, general-purpose device that securely holds fiber cables and provides strain relief. The fiber can be clamped in place in either of two V-grooves. The two clamping bars can mount on an SP Series Support Post (see page 705) at any convenient height. They lock in place with a knurled thumbscrew. For direct mounting to tables, positioners and post holders, a stub post with a threaded stud is also provided. The stub post can also be used to hold a cable in the outer V-groove when the clamp is post-mounted. The V-groove arrangement makes this clamp useful as a laboratory holder for small cylindrical optical elements as well as optical and electrical cables. Ordering Information Model Description F-CC Universal Cable Clamp ø.50 (12.7) STUB POST 1.46 (37.0) MAX 1.10 (27.9) MIN .625 (15.9) 8-32 THD .44 (11.2) 2.63 (66.8) ø.50 (12.7) POST 1.625 (41.3) 1.755 (44.6) 1.50 (38.1) UV-Curing Epoxy UV-Cured Liquid Polymer Adhesives are suited for fast, high-precision bonding of optics. The transmission of a 0.25 mm-thick adhesive layer is greater than 98% from 400–2000 nm. The adhesive can be pre-cured in seconds and fully cured in minutes with a typical 350–380 nm 100 mW UV mercury spot lamp. Available in 1 oz. applicator bottles. Specifications Model F-UVE-61 F-UVE-63 F-UVE-65 F-UVE-68 F-UVE-81 Glass Adhesion Excellent Good Good Excellent Excellent Metal Adhesion Excellent Good Good Good Excellent Plastic Adhesion Fair Fair Fair Very Good Fair Recommended Use Extremely strong bonding of optics; low shrinkage; meets MIL-A-3920 Cures well in thick sections; transmits 350–2000 nm Flexible; for lowstrain applications or cold blocking of lenses Flexible; good for polycarbonate CAB or acrylic Very fast curing for tacking or bonding Viscosity (cps) 300 2500 1000 5000 300 Refractive Index, Cured 1.56 1.56 1.52 1.54 1.56 Storage Temperature Range -150°C to 125°C (after 1 week of aging) -15°C to 60°C -15°C to 60°C -80°C to 90°C (after 1 week of aging) -150°C to 125°C Ordering Information Model F-UVE-61 F-UVE-63 F-UVE-65 F-UVE-68 F-UVE-81

Open the catalog to page 1