Catalogs >
MICRO-CONTROLE / Spectra-Physics >
ULTIMA® Series Low Distortion Six-Point Mirror Mounts

ULTIMA® Series Low Distortion Six-Point Mirror Mounts
1 / 2Pages

Catalog excerpts

ULTIMA® Series Low Distortion Six-Point Mirror Mounts - 1

ULTIMA® Series Precision Kinematic Optical Mounts U400-AC2K U300-AC2K U200-AC2K U100-AC2K ULTIMA® Precision Kinematic Optical Mounts minimize mount-induced wavefront distortion. Side set screw mounting, found in most optical mounts, is fine for many applications but our tests have shown that this technique induces wavefront distortion in the optic if the set screw is tightened a little too much. ULTIMA-AC optical mounts use spring-loaded pawls to gently, but securely, hold high precision optics from the back against three points on the front plate of the mount. Wavefront distortion in the optic is minimized because the forces acting on the optic are axial, instead of radial and are more distributed. For applications requiring secure mounting, the pawls can be tightened further, compressing the springs, and clamping the optic between the three points on the front plate and the pawls. • Minimizes mount-induced wavefront distortion • Spring-loaded pawls gently clamp optics in the mount • Thick plates and extra-stiff springs for long-term stability • Quick-change actuators Spring Loaded Pawls Optics Mount’s Face Plate Center Line Spring-loaded pawls are used to hold the optic to minimize the wavefront distortion or can be clamped to provide enhanced security. Broadband Dielectric Mirrors (see page 524) 652 Phone: 1-800-222-6440 • Fax: 1-949-253-1680 O p t o - M e c h a n i c s SPECIALTY OPTICAL LENS HOLDERS MIRROR MOUNTS TECHNICAL REFERENCE MOUNTS ACCESSORIES EDUCATIONAL KITS RAIL SYSTEMS BASES AND BRACKETS POST AND ROD SYSTEMS Model PS-45-ULT .93 (23.62) Ultima Version .83 (21.08) Suprema Version 1.00 ( 25.4) 45° .09 (2.28) Installed 2.75 (70) Installed 2.00 (50.8) Mirror Mount Sold Separately Pedestal Sold Separately .625 (15.87) Ultima Version .500 (12.7 ) Suprema Version C'bored Mounting Hole or 8-32 (M4) Thread Thru See our website CADfor CAD files

Open the catalog to page 1