Catalogs >
MICRO-CONTROLE / Spectra-Physics >
ULTIMA® Series Corner Gimbal Clear Quadrant Optic Mounts

ULTIMA® Series Corner Gimbal Clear Quadrant Optic Mounts
1Pages

Catalog excerpts

ULTIMA® Series Corner Gimbal Clear Quadrant Optic Mounts - 1

654 SPECIALTY OPTICAL LENS HOLDERS MIRROR MOUNTS TECHNICAL REFERENCE MOUNTS ACCESSORIES EDUCATIONAL KITS RAIL SYSTEMS BASES AND BRACKETS POST AND ROD SYSTEMS Phone: 1-800-222-6440 • Fax: 1-949-253-1680 O p t o - M e c h a n i c s ULTIMA® Series Corner Gimbal Optical Mounts U100-ACG shown with AJS100-0.5K-NL actuators. ULTIMA® Corner Gimbal Optical Mounts can tilt an optic without translating its surface by adjusting two adjacent actuators. Placing the center of the optic in the corner, at the intersection of the actuator axes, and adjusting two adjacent actuators an equal amount, results in gimbal-like motion. Adjust one actuator at a time and the mount acts as a standard kinematic optical mount. Adjust all three actuators to translate the optic. The optic mounts from the rear so that the optical surface is at the plane of rotation, regardless of the optic thickness. Ordering Information Model Description Optic Diameter [in. (mm)] Adjustment Screw Thread Drive Type Angular Range (°) Sensitivity(1) (arc sec) Translation(2) [in. (mm)] U100-ACG 1 in. Aperture Base 1.0 (25.4) U100-ACG-2K-NL 1 in. Aperture Base with (2) AJS100-0.5K-NL 1.0 (25.4) 100 TPI Knob ±5 3.8 U100-ACG-3K-NL 1 in. Aperture Base with (3) AJS100-0.5K-NL 1.0 (25.4) 100 TPI Knob ±5 3.8 0.38 (9.7) 1) Typical, based on 1° rotation of actuator screw. 2) Translation of the optic occurs by turning all 3 actuators. U.S. Patents 6,304,393 and 5,930,057 Pinhole Free™ Broadband Metalic Mirrors (see page 522) • Gimbal movement with kinematic stability • Position optics in tight locations • Patented Clear Quadrant Design • Thick plates and extra-stiff springs for long-term stability • Precision 100 or 127 TPI adjustment screws • Large choice of precision actuators • English or metric compatible Model U100-ACG-3K-NL 2.40 (61.0) 2.24 (56.9) .31 (7.9) 2X M4 & 8-32 THD CLR .31 (7.9) 1.00 (25.4) 1.00 (25.4) 1.14 (29.0) 1.75 (44.5) ø 1.00 (25.4) Nom Optic 1.75 (44.5) See our website CADfor CAD files

Open the catalog to page 1