Catalogs >
MICRO-CONTROLE / Spectra-Physics >
Three-Axis Spatial Filters

Three-Axis Spatial Filters
2Pages

Catalog excerpts

504 Phone: 1-800-222-6440 • Fax: 1-949-253-1680 O p t i c s TECHNICAL REFERENCE AND FUNDAMENTAL APPLICATIONS CYLINDRICAL AND SPHERICAL LENSES LENS SELECTION GUIDE SPECIALTY LENSES PRISMS MIRRORS OPTICAL SYSTEMS OPTICS SETS Three-Axis Spatial Filters This spatial filter is an elegantly simple device featuring an accessible design with precision micrometer control over pinhole placement and objective lens focus. The pinhole mount is magnetically registered against the machined faces of the non-rotating X-Y adjustment spindles. A precision-machined slot in the pinhole mount mates repeatably to the spindle face, resisting accidental motion of the mount while permitting fine adjustment. The objective lens Z-axis motion is provided by a precision linear bearing, so that focus is found and maintained without jitter or side-play. The long-travel focus adjustment accommodates virtually any objective lens. The open architecture of this spatial filter makes it especially easy to change pinholes and objectives. These spatial filters are designed to accommodate all M- and MV-Series Objective Lenses, the L-4X and L-50X Infinity-Corrected Objective Lenses, and 900PH-Series Mounted Pinholes. Objective lenses and mounted pinholes must be ordered separately (see pages 492 and 507). Alignment Aligning our Model 900 Spatial Filter is straightforward. Start by positioning the spatial filter assembly in the laser beam while observing the back reflections from the objective lens to bring both into alignment. To align the pinhole, first defocus the lens, then while observing the pinhole substrate, adjust the pinhole position until a faint light appears at the output. Alternate the lens Z-axis adjustment with X-Y pinhole position corrections until the best throughput and focus are achieved. This is indicated when a deliberate pinhole movement causes the symmetric output pattern to quickly disappear. A slow smear means a poor focus. • Precise, long-travel 3-axis micrometer adjustments • Accommodates virtually any microscope objective • Unobstructed view of pinhole aids adjustment • Easy pinhole removal and replacement Specifications Degrees of Freedom XYZ Range, XY [in. (mm)] ±0.25 (±6.5) Range, Z [in. (mm)] ±0.25 (±6.5) Sensitivity, XY (ìm) <2 Sensitivity, Z (ìm) <2 Lens/Pinhole Selection Guide Objective Lens Recommended Max. Input Beam Diameter ( mm) Calculated Pinhole Diameter* ( ìm) Recommended Pinhole Diameter ( ìm) Recommended Pinhole M-5X or MV-5X 5.0 32.2 50 900PH-50 M-10X or MV-10X 5.5 20.9 25 900PH-25 M-20X or MV-20X 5.0 11.4 15 900PH-15 M-40X or MV-40X 4.0 5.7 10 900PH-10 M-60X or MV-60X 3.5 3.7 5 900PH-5 * For 1 mm diameter beam at 632.8 nm (see page 436). M- and MV-Series objective lenses (page 492) Adjustable Slits (see page 703) Pinhole Apertures (see page 507) Tilt Stages (see page 917)

Open the catalog to page 1

O p t i c s 505 Email: sales@newport.com • Web: newport.com TECHNICAL REFERENCE AND FUNDAMENTAL APPLICATIONS LENS SELECTION GUIDE SPHERICAL LENSES CYLINDRICAL AND SPECIALTY LENSES OPTICS SETS OPTICAL SYSTEMS MIRRORS PRISMS 119.1 133.4 MIN 146.1 MAX 43.2 17.4 12.7 15.5 76.2 35.2 MIN 47.4 MAX 9.3 MIN 23.4 MAX 30.0 MIN 43.9 MAX 3 HOLES, 1/4-20 (M6) CLR 50.8 17.5 38.1 25.4 (25.0) TYP Dimensions in mm Ordering Information Model (Metric) 900 (M-900) 900P-MNT (900P-MNT) Compact Five-Axis Spatial Filters 910A Our 910A Series Spatial Filter has a space-efficient design combining five-axis alignment...

Open the catalog to page 2

Three-Axis Spatial Filters 2Pages

Catalog excerpts

All MICRO-CONTROLE / Spectra-Physics catalogs and technical brochures

Three-Axis Spatial Filters
2Pages