1. Catalogs
  2. MICRO-CONTROLE / Spectra-Physics
  3. TE Series Table Enclosures
video corpo

TE Series Table Enclosures
1 /1Page

TE Series Table Enclosures

TE Series Table Enclosures
1 /1Page

Catalog excerpts

TE Series Table Enclosures  -1

O p t i c a l Ta b l e s a n d V i b r a t i o n C o n t r o l 1007 Email: [email protected] • Web: newport.com TECHNICAL REFERENCE OPTICAL TABLES HONEYCOMB, GRANITE AND RIGID STRUCTURES BREADBOARDS AND GRID PLATFORMS ISOLATORS WORKSTATIONS AND ISOLATED PLATFORMS STRUCTURAL RAILS AND CARRIERS TESTING, ANALYSIS AND DESIGN Table Enclosures TE Series TE80 Series table enclosure. * Table and legs sold separately. TE14xxand TE15xx Series table enclosure. * Table and legs sold separately. • Improves results by reducing air currents. • Raises S/N ratio for optical data processing applications • Easily installed around existing Newport optical tables • Can be custom built to your specification The Model TE1000 Series Enclosure inhibits disruptive acoustic energy from reaching the table optics, improves reconstruction brightness, permits longer exposures and lowers laser power requirements. The standard enclosure of sliding, clear 3/16 in. (4.8 mm) acrylic side panels is suspended from a rigid honeycomb roof. Enclosures can be supplied with amber or dark tinted side panels on a semi-custom basis. Also available are static dissipative cleanroom compatible panels. The New TE80 Series Table enclosures are a combination of the 80/20 rail and frame system, that rests on the floor rather than the table top, 1/4" thick, sliding acrylic panels and an overhead shelf system. Electrical outlets, LAN hubs and lighting are all optional accessories that can be designed into the enclosure. The Model CAB-1 Clean Air Blower Accessory produces slight positive pressure inside the table enclosure to prevent airborne dust from entering. The filter is 95% efficient in removing particles over 5 microns in diameter. The blower is intended for use during periods between precision measurements. Fan filter units and ionizing blowers can be special ordered. Ordering Information Model Dimensions [ft (m)]* TE1406 (M-TE1406) 4 (1.2) x 6 (1.8) x 31.625 (0.80) TE1408 (M-TE1408) 4 (1.2) x 8 (2.4) x 31.625 (0.80) TE1410 (M-TE1410) 4 (1.2) x 10 (3.0) x 31.625 (0.80) TE1412 (M-TE1412) 4 (1.2) x 12 (3.6) x 31.625 (0.80) TE1414 (M-TE1414) 4 (1.2) x 14 (4.2) x 31.625 (0.80) TE1416 (M-TE1416) 4 (1.2) x 16 (4.8) x 31.625 (0.80) TE1418 (M-TE1418) 4 (1.2) x 18 (5.4) x 31.625 (0.80) TE1420 (M-TE1420) 4 (1.2) x 20 (6.0) x 31.625 (0.80) TEN1506 (M-TEN1506) 59.06 (1.5) x 6 (1.8) x 31.625 (0.80) TEN1508 (M-TEN1508) 59.06 (1.5) x 8 (2.4) x 31.625 (0.80) TEN1510 (M-TEN1510) 59.06 (1.5) x 10 (3.0) x 31.625 (0.80) TEN1512 (M-TEN1512) 59.06 (1.5) x 12 (3.6) x 31.625 (0.80) TEN1514 (M-TEN1514) 59.06 (1.5) x 14 (4.2) x 31.625 (0.80) TEN1516 (M-TEN1516) 59.06 (1.5) x 16 (4.8) x 31.625 (0.80) * 5 ft. wide tables are actually 59.06 inches (1.5 m) wide. For metric sized tables with metric hole spacing, add prefix "M" to the model number. Please contact a Newport Applications Engineer to discuss your TE80 Series Table enclosure needs.

 Open the catalog to page 1

All MICRO-CONTROLE / Spectra-Physics catalogs and technical brochures

  1. 10BPF10-310

    1  Page

  2. M-401

    1  Page

  3. newport ressource

    1640  Pages

  4. Motion PL30

    24  Pages

  5. Nanopositioners

    40  Pages

  6. Beamsplitters

    34  Pages

  7. Optrical mirror

    33  Pages

  8. Motion System

    2  Pages

  9. Base Clamps

    1  Page

  10. Rod Clamps

    1  Page

  11. V-Blocks

    1  Page

  12. Blackbodies

    2  Pages

  13. Beam Dump

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.