Catalogs >
MICRO-CONTROLE / Spectra-Physics >
PulseScout Autocorrelator

PulseScout Autocorrelator
2Pages

Catalog excerpts

1154 Phone: 1-800-222-6440 • Fax: 1-949-253-1680 L i g h t Te s t a n d M e a s u r e m e n t s I n s t r u m e n t s BEAM ANALYSIS POWER AND ENERGY METERS DETECTORS Ordering Information Model Description UPM-8-10 Ultrashort Laser Pulse Measurement Device, 10 - 100 fs Range, 800 nm UPM-8-20 Ultrashort Laser Pulse Measurement Device, 18 - 180 fs Range, 800 nm UPM-8-50 Ultrashort Laser Pulse Measurement Device, 50 - 500 fs Range, 800 nm UPM-8-200 Ultrashort Laser Pulse Measurement Device, 150 fs - 2 ps Range, 800 nm UPM-10-100 Ultrashort Laser Pulse Measurement Device, 100 fs - 1ps Range, 1000 nm UPM-15-100 Ultrashort Laser Pulse Measurement Device, 100 fs - 1ps Range, 1550 nm UPM-SP-1 Mesa Photonics VideoFROG with USB UPM-SP-2 Femtosoft QuickFROG with USB PulseScout Autocorrelator A versatile, easy-to-use diagnostic for measuring ultrafast pulses. The PulseScout™ is capable of measuring pulse widths from both high repetition rate (MHz) oscillators and low repetition rate (kHz) amplifiers in the visible and IR wavelength range. In the past, measuring ultrafast pulses from ultrafast lasers required separate autocorrelation technology: low repetition rate amplifier pulses were measured using single-shot autocorrelators, high repetition rate oscillator pulses were measured using a spinning glass block. With the PulseScout, separate autocorrelators are no longer necessary. The unit comes equipped with either a photodiode detector module to detect and measure high-energy amplified pulses, or a photomultiplier based detector to measure low-energy oscillator pulses. Conveniently, these detector modules use the same autocorrelator optical head and are fully interchangeable in seconds. Alignment is straight-forward and can also be done in seconds making the PulseScout the ideal diagnostic tool for all of your ultrafast applications. • <50 fs to >3.5 ps pulse width capability • Optional short pulse (20 fs) capability • 4 different wavelength ranges covering (420–1600 nm) • CPU addressable • On-board electronics – no oscilloscope necessary • Small footprint (16 cm x 16 cm x 16 cm) Specifications Output Characteristics PSCOUT HR PSCOUT LR PSCOUTSP HR PSCOUTSP LR Wavelength Range (nm) 700-1100 Detector Type PMT Photodiode PMT Photodiode Scan Ranges 150 fs to 15 ps Minimum Pulse Width <50 fs <20 fs Maximum Pulse Width 3.5 ps Linearity > 1% of Actual Scan Range Input Polarization Horizontal (vertical with optional polarization rotator) ReadOut Color LCF 320 x 240 pixels Output Delay: Analog 0-10 V; Signal: Analog 0-10 V; RS232 Serial Interface Input Trigger: TTL

Open the catalog to page 1

1155 DETECTORS POWER AND ENERGY METERS BEAM ANALYSIS L i g h t Te s t a n d M e a s u r e m e n t s I n s t r u m e n t s Email: sales@newport.com • Web: newport.com Detector Module Specifications Model(1) Type Wavelength Range (nm) PSCOUTUPG-BLUE1 Photomultiplier 420-550 PSCOUTUPG-BLUE2 Photodiode 420-550 PSCOUTUPG-RED1 Photomultiplier 520-750 PSCOUTUPG-RED2 Photodiode 520-750 PSCOUTUPG-HR Photomultiplier 700-1100 PSCOUTUPG-LR Photodiode 700-1100 PSCOUTUPG-IR1 Photomultiplier 1000-1600 PSCOUTUPG-IR2 Photodiode 1000-1600 Ordering Information Model Description PSCOUT HR PulseScout...

Open the catalog to page 2

PulseScout Autocorrelator 2Pages

Catalog excerpts

All MICRO-CONTROLE / Spectra-Physics catalogs and technical brochures

PulseScout Autocorrelator
2Pages