*mydirectindustry

Catalogs
MICRO-CONTROLE / Spectra-Physics
Oriel Low Cost Electronic Shutter

Oriel Low Cost Electronic Shutter

Product catalog summary

Overview: The document provides details about the Oriel Low Cost Electronic Shutter, model 71455, used in spectroscopy instruments. It is designed for integration with Oriel Monochromators and Spectrographs and is suitable for applications requiring precise control of light exposure.

Specifications:

Aperture: 0.4 inches (10 mm) in diameter.
Minimum Exposure Time: 0.2 seconds.
Maximum Repetition Rate: 0.5 Hz (for faster rates, refer to page 1317).
Light Leakage: Less than 0.01%.
Damage Threshold: Suitable for sources up to 150 W.
Input Voltage: 110/220 VAC, 50/60 Hz.
Weight: 1 lb (0.83 kg).

Features:

The shutter is "normally closed" and can be controlled via TTL pulses or an open/close switch on the housing.
It is packaged in a flange-mounted enclosure with a thin profile for easy integration into optical setups.
Compatible with the 68945 Digital Timer for repeatable, timed exposures.

Installation and Usage:

The shutter can be mounted using a 1.5-inch series male flange and includes a 1/4-20 mounting hole.
A 6 ft. (1.8 m) Timer to Shutter Cable is included with the 68945 Timer for easy connection.

Ordering Information:

Model 71455: Low Cost Electronic Shutter.
Model 68945: Digital Timer.

Additional Information: For more details, refer to the manufacturer's website.

Catalog excerpts

S p e c t r o s c o p y I n s t r u m e n t s 1319 Email: [email protected] • Web: newport.com MONOCHROMATORS AND SPECTROGRAPHS SINGLE CHANNEL DETECTION SYSTEMS MINISPECTROMETERS BENCHTOP SPECTROMETERS AND CCD CAMERAS FT-IR SPECTROMETERS ACCESSORIES FOR SPECTROSCOPY INSTRUMENTS Oriel Low Cost Electronic Shutter The 71455 Shutter System is the integrated shutter from our Oriel Monochromators and Spectrographs, packaged in a flange mounted enclosure with a 5 V power supply. It is “normally closed.” The aperture is 0.4 inches (10 mm) in diameter. The thin, 0.8 inch (20 mm), profile allows flange or rod mounting in the middle of a tight optical train. The 71455 does not include a driver. It accepts TTL pulses to open and close. There is also an open/close switch on the shutter housing, for alignment of a source, detector or other system component. Timed Exposures You can produce repeatable, timed exposures with the 71455 Shutter and 68945 Digital Timer (described on page 226). Set the exposure time and interval, and the 68945 sends the timing signal to the shutter via TTL pulses. A 6 ft. (1.8 m) long Timer to Shutter Cable is included with the 68945 Timer. Specifications Minimum Exposure Time 0.2 s Maximum Repetition Rate 0.5 Hz* Light Leakage <0,01% Aperture 0.4 inch (10 mm) Damage Threshold can be used with sources 150 W Input Voltage 110/220 VAC, 50/60 Hz Weight 1 lb (0.83 kg) * For fast shutters (rep rates to 200 Hz), see page 1317. 0.8 (20) 0.35 DIA. C.A. (8.9) CLOSED OPEN TTL SHUTTER PWR EXT 1.5 INCH SERIES MALE FLANGE 1/4-20 MOUNTING HOLE (3 PLACES) 1.5 INCH SERIES QUICK CONNECT FEMALE FLANGE 1.5 (38) 1.5 (38) 3.0 (76) 1.6 (41) 0.4 (10) 5.0 (127) Ordering Information Model Description 71455 Low Cost Electronic Shutter 68945 Digital Timer See our website WEBfor more info Fig. 1 Dimensional diagram of 71455 Shutter 71455 Shutter mounted to the input of MS125™ Spectrograph.

Open the catalog to page 1

All MICRO-CONTROLE / Spectra-Physics catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list