Catalogs >
MICRO-CONTROLE / Spectra-Physics >
Oriel Linespec™ Gated Linear CCD Array Detector

Oriel Linespec™ Gated Linear CCD Array Detector
1 / 1Pages

Catalog excerpts

Oriel Linespec™ Gated Linear CCD Array Detector - 1

1258 Phone: 1-800-222-6440 • Fax: 1-949-253-1680 S p e c t r o s c o p y I n s t r u m e n t s MONOCHROMATORS AND SPECTROGRAPHS BENCHTOP SPECTROMETERS MINISPECTROMETERS SINGLE CHANNEL DETECTION SYSTEMS AND CCD CAMERAS ACCESSORIES FOR FT-IR SPECTROMETERS SPECTROSCOPY INSTRUMENTS Oriel Linespec™ Gated Linear CCD Array Detector 78105 LineSpec Gated Linear CCD Detector. Choose one of these CCDs for gated spectral measurements such as pulsed laser diagnostics and fringe analysis, and fluorescence lifetime measurements. They use a 3000 element linear CCD with 200 x 7 ìm pixels; the array length is 21 mm. We offer two models of LineSpec™ Gated CCDs, differing in spectral response; see Fig. 1 QUANTUM EFFICIENCY (%) 800 WAVELENGTH (nm) VIS 200 300 400 500 600 700 900 1000 50 40 30 20 10 UV-VIS 60 Fig. 1 Quantum efficiency of LineSpec Gated Linear CCDs The systems described here are detection systems, only. They do not include a spectrograph. We offer a line of 1/8 and 1/4 m spectrographs on pages 1209 to 1215. A LineSpec™ Gated Linear CCD Detection System includes: • 3000 element linear CCD array • USB Interface • LineSpec Data Acquisition and Control Software LineSpec Software The LineSpec software is an instrument control and data acquisition software that runs under Windows 98/W2K/XP. The software supports routine spectroscopic measurements and data acquisition. Data can be exported into most MS applications. We also offer optional LabView Drivers and an OEM Developer’s Kit. • 5 ìs to 10 s integration times • 3000 element linear CCD array • UV - NIR and VIS - NIR models • USB interface Specifications Pixel Size 200 ìm (H) x 7 ìm (W) Array Length 21 mm Saturation Exposure at 632 nm 4.7 nJ cm-2 (total); 6.6 x 10-5 nJ (per pixel) Readout Noise (in electrons, RMS) 114 e, typ. Dark Current @ 25°C, rms 4600 e/s Maximum S/N for single shot 374 Dynamic Range (well capacity/readout noise) 956 Sensitivity (12 bit ADC) 17 e (count) Integration Time 10 ìs to 30 s Rise and fall time jitter <50 ns ns Analog Output 0 - 5 V Working Temperature 25 °C Repetition Rate (Stand-alone mode, i.e. output to oscilloscope)* 150 scans/s @ 500 kHz readout rate and 10 ms integration time A/D Converter 12 bit Computer Interface USB 1.0, 2.0 Software Environments Windows 98/W2K/XP RAM Requirements 64 MB * When using one of these LineSpec Detectors with an oscilloscope, you will need to supply a 5 V DC, 500 mA power supply, to drive LineSpec. Ordering Information LineSpec Gated Array Detectors Model Spectral Range 78105 200 - 1100 nm 78106 350 - 1100 nm* * These CCDs show interference fringes when exposed to dispersed light, such as in the output plane of a spectrometer. Mounting Flanges (to mate LineSpec Gated CCDs to Oriel Spectrographs) For This Spectrograph Mounting Flange Model MS125TM 77439 77700 MS257™ Lateral Port 77786 MS127iTM Not required MS260i™ (for axial port) Not required MS260i™ Lateral Port 77462 Accessories Model Description 78822 HgAr Calibration Set 78842 OEM Developer’s Kit 78847 LabView Drivers See our website WEBfor more info

Open the catalog to page 1