Catalogs >
MICRO-CONTROLE / Spectra-Physics >
MS Series Miniature Linear Stages

MS Series Miniature Linear Stages
4Pages

Catalog excerpts

890 Phone: 1-800-222-6440 • Fax: 1-949-253-1680 M o t i o n C o n t r o l MANUAL ROTATION MANUAL LINEAR STAGES TECHNICAL REFERENCE STAGES MOTORIZED LINEAR MANUAL ACTUATORS STAGES MOTORIZED ROTATION STAGES CONTROLLERS AND MOTORIZED ACTUATORS AMPLIFIERS SYSTEMS Model MT-X 1.00 (25.4) .63 (16.0) .50 (12.7) .50 (12.7) THD A 1.00 (25.4) .50 (12.7) .50 (12.7) THD A .625 (15.9) .175 (44.5) Model MT-XY 1.75 (44.5) 1.25 (31.8) THD A .50 (12.7) .63 (16.0) .50 (12.7) THD A .50 (12.7) .50 (12.7) 1.00 (25.4) 1.00 (25.4) Model MT-XYZ .50 (12.7) .81 (20.6) MIN 1.19 (30.2) MAX THD A .50 (12.7) 2.13 (54.1) MAX 2.63 (66.8) .50 (12.7) 1.31 (33.3) MIN 1.69 (42.9) MAX .50 (12.7) THD A 1.00 (25.4) 1.00 (25.4) Thread Model (Metric) A MT-X (M-MT-X) 8-32 (M4) MT-XY (M-MT-XY) 8-32 (M4) MT-XYZ (M-MT-XYZ) 8-32 (M4) MT-AB2 (M-MT-AB2) 8-32 (M4) MS Series Miniature Linear Stages • Low profile • Precision 80 TPI adjustment • High load/size ratio • Zero backlash • <0.01 mrad wobble • Over 16 unique configurations The MS Series offers unmatched performance in an extremely small package. Ideal for applications where precision is required but space is limited. These micropositioners are provided in X, XY and XYZ configurations. Hardened precision rods are preloaded against a four corner hardened slider for smooth, wear-resistant motion. A return spring provides built-in preload to eliminate backlash. The unique carriage design eliminates wobble while providing an extremely robust stage. MS-500-X MS-125-X See our website CADfor CAD files Accessories Accessories • Thumb grip—increased resolution • Headless adjusting screw • Adaptor plate • Pinhole adaptor • Objective adaptor The knurled thumb grip can be added to MS-125 or MS-500 stages to enhance resolution and alternatively can be used as a locking nut. With the pinhole adaptor, apertures can be changed by replacing the entire adaptor or by removing and replacing the aperture only. A soft rubber washer can be used under the adaptor for slit aperture orientation. The headless adjusting screws replace a standard thumb screw while reducing the overall length of the stage by 0.4 and 0.5 in. (10.2 and 12.7 mm) (MS-125 and MS-500 respectively). A multi-position adaptor plate interfaces with standard optical tables and can provide additional footprint to free-standing stages. The objective adaptor allows mounting of standard microscope objectives to MS-500 stages.

Open the catalog to page 1

M o t i o n C o n t r o l 893 Email: sales@newport.com • Web: newport.com TECHNICAL REFERENCE MANUAL LINEAR STAGES MANUAL ROTATION STAGES MANUAL ACTUATORS MOTORIZED LINEAR STAGES MOTORIZED ROTATION STAGES MOTORIZED ACTUATORS CONTROLLERS AND AMPLIFIERS SYSTEMS M-MR1.4 MS-TG-1 Thumb Grip (MS-TG-1) .5 in. (MS-TG-3) .63 in. Tapped hole Adjusting screw .06 in. (MS-TG-1) .08 in. (MS-TG-3) 2-80 thread (MS-TG-1) {6-80 thread (MS-TG-3) MS-SS-1 Headless Adjusting Screw .050 allen socket Balldriver .30 in. or std hex key Stage 6-80 thread (MS-500) 2-80 thread (MS-125) (MS-125) .63 in. (MS-500) MS-AP-3...

Open the catalog to page 4

MS Series Miniature Linear Stages 4Pages

Catalog excerpts

All MICRO-CONTROLE / Spectra-Physics catalogs and technical brochures

MS Series Miniature Linear Stages
4Pages