Catalogs >
MICRO-CONTROLE / Spectra-Physics >
MODEL 185F HIGH POWER OEM AIR-COOLED ION LASER SYSTEMS

MODEL 185F HIGH POWER OEM AIR-COOLED ION LASER SYSTEMS
2Pages

Catalog excerpts

MODEL 185F HIGH POWER OEM AIR-COOLED ION LASER SYSTEMS - 1

MODEL 185F HIGH POWER OEM AIR-COOLED ION LASER SYSTEMS PERFORMANCE SPECIFICATIONS1 SERVICES AND OPERATING PARAMETERS1 UL 1950 EN 50082-1: 1992 EN 55011: 1991 EN 60825-1: 1994 EN 60950: 1992 EN 61010-1: 1993 EN 61000-3-2: 1995 EN 61000-3-3: 1995 73/23/EEC: 1973 89/336/EEC: 1989 CDRH, 21 CFR 1040.10 PRINTED IN THE USA • 6/2001 • PART NUMBER 0452-2270, REV. C Compliance has been demonstrated to the following regulatory requirements for UL, CE and CDRH: ® Spectra-Physics 1335 Terra Bella Avenue Mountain View, CA 94043 Tel: 1-800-775-5273 Tel: 1-(650) 961-2550 Fax: 1-(650) 964-3584 e-mail: sales@splasers.com http://www.splasers.com Australia: (61) 8-8443-8668 Belgium: (31) 40 265 99 59 China: (86) 10 6256 2934 France: (33) 1 6918 63 11 Germany: (49) 6151-708300 Hong Kong: (852) 2523-5688 India: (91) 80 6763 465 Israel: (972) 3-6356650 Italy: (39) 02-57465-1 Japan: Tokyo (81) 3-3794-5511 Osaka (81) 6-6941-7331 Netherlands: (31) 40 265 99 59 S. Korea: (82) 2-587-8727 Spain: (34) 91-3775006 Scandinavia: (46) 8-550 10403 Taiwan: (886) 3-426-2376 UK: (44) 1442-258100 Other European Countries: (49) 6151-7080 Other Pacific Countries: 1-650-961-2550 LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT ARGON MAXIMUM OUTPUT 0.50 W Common Beam Characteristics Polarization Extinction Ratio > 100:1 (E-vector vertical ± 5°) Longitudinal Mode Spacing (nominal) 440 MHz Beam Waist Location Output of laser head Operating Parameters/Interfaces Plasma Tube Operating Current Limits (nominal) Minimum 4 A Maximum 12 A Services and Equipment Cooling Air Required Laser Head 3.3 m3 (115 CFM) 4 Power Supply 0.68 m3 (24 CFM) Environmental Electric Service Required Temperature Range 4 – 40° C Humidity (noncondensing) 0 – 95% Voltage (± 10%) 200 – 240 Vac ac nominal Current 16 A max Frequency 47 – 63 Hz Phase Single Altitude 0 – 3000 m (0 – 9800 ft) Stability 2 Power At turn on Stability over 2 hours 3 > 95% of stabilized power ± 1% Beam Pointing Angular ± 30 ìrad/±3° C Wavelength Specific Characteristics Wavelength 514 488 458 All Lines Beam Diameter (mm) 0.65 ± 5% 0.65 ± 5% 0.65 ± 5% 0.65 ± 5% Beam Divergence (mrad) (nominal) 1.0 1.0 1.0 1.0 Spatial Mode (TEM00) M2 < 1.2 M2 < 1.2 M2 < 1.2 M2 < 1.2 Power Supply Switching Frequency Nominal 100 kHz Power Supply Overall Efficiency Nominal > 90% Available Interface Provides These Controls 5 Power Adjust Power Monitor Interlock Current Adjust Current Monitor Run/Standby Noise Switching Frequency Synchronous Periodic 3% peak to peak Broadband 10 Hz – 3 kHz < 0.2% rms 10 Hz – 2 MHz < 0.5% rms 1. Specifications subject to change without notice. 2. All measurements made in light control mode after a 30-minute warm-up, unless otherwise stated. 3. Stability is measured over any 2-hour period after a 5-minute warm-up. 4. Use Kooltronics Model KBB47 or equivalent fan rated for 185 CFM and 1.8 inches of water. 5. Local control is not provided on the 285F power supply. System control is via a remote interface connector (25-pin D-sub) on the front panel. ISO 9001 Certified

Open the catalog to page 1

MODEL 185F HIGH POWER OEM AIR-COOLED ION LASER SYSTEMS - 2

MODEL 185F HIGH POWER OEM AIR-COOLED ION LASER SYSTEMS The Model 185F delivers high power in a compact package design. The small footprint and electrical interface make the Model 185F compatible with the Uniphase 2013 Air-cooled Laser Systems. The plasma tube is based on Spectra- Physics’ proven Metal/BeO tube technology and patented “Wavelength Selective Mirrors.”* Spectra-Physics’ plasma tube technology ensures this laser will provide higher output power while maintaining exceptional lifetime. Power factor corrections to EN 61000-3-2: 1995, have been incorporated. Spectra-Physics - 285...

Open the catalog to page 2