Catalogs >
MICRO-CONTROLE / Spectra-Physics >
Mid-Travel Steel Linear Stages M T N - B L H S S e r i e S

Mid-Travel Steel Linear Stages M T N - B L H S S e r i e S
2Pages

Catalog excerpts

Mid-Travel Steel Linear Stages M T N - B L H S S e r i e S - 1

MTN-BLHS's are reliable, all-steel construction stages with excellent stiffness, load capacity and thermal stability. They are ideal for applications that require moving heavy loads at high-speeds with very fine repeatability. Available in 100, 200 and 300 mm travel versions, the MTN-BLHS stages can bear up to 100 kg centered load, when mounted horizontally. The linear guides guarantee smooth and accurate motion trajectory, while the non migrating ball cage design prevents from drift. The MTN-BLHS is much faster than MTN-CC and MTN-PP series and provides same 10 kg axial load capacity in both directions due to ball screw drive mechanism (note, that this is the back drivable load). DESIGN DETAILS Base Material Stainless Steel Bearings Linear ball bearings with anti- cage migration Drive Mechanism Ballscrew drive Drive Screw Pitch 4 mm Limit Switches Optical Origin Optical, centered CV> Newport9 • 100 kg centered and 10 kg axial load capacity • All steel construction guaranteeing high stiffness and thermal stability • Ball screw drive for high dynamics and long lifetime • Non-migrating ball cage design for reliable performance • Plug and Play - ESP compatible SPECIFICATIONS Travel Range (mm) MIM (pm) Uni-directional Repeatability, Typical (Guaranteed)111 (pm) Bi-directional Repeatability, Typical (Guaranteed)111 (pm) Accuracy, Typical (Guaranteed)111 (pm) 11 For the definition of Typical and Guaranteed specifications see "Motion Basics Terminology & Standards" at www.newport.com. 21 Over 100 mm travel. 31 To obtain arcsec units, divide mrad value by 4.8.

Open the catalog to page 1

Mid-Travel Steel Linear Stages M T N - B L H S S e r i e S - 2

MTN-BLHS SerieS DIMENSIONS LOAD CHARACTERISTICS AND STIFFNESS 9 HOLES M6 THD DEPTH: .39 (10), .98 (25) SPACING 4 HOLES M6 THD, ON SQR 2.48 (63) C’BORED FOR CAPTIVE SCREWS 2 HOLES ø.41 (10.5) ACCESS FOR MOUNTING TO BODY ON SQR 1.98 (50.4) 2 HOLES ø.41 (10.5) ACCESS FOR MOUNTING TO BODY ON SQR 2.48 (63) MODEL SHOWN: MTN200BLHS DIMENSIONS IN INCHES (AND MILLIMETERS) BOTH SIDES: 4 HOLES M6 THD, DEPTH: .31 (8) FOR ACCESSORIES AND HANDLING Cz, Normal centered load capacity on bearings +Cx, Axial load capacity -Cx, Inverse axial load capacity kax, Compliance in roll kay, Compliance in pitch kaz,...

Open the catalog to page 2