Catalogs >
MICRO-CONTROLE / Spectra-Physics >
Integrating Spheres and Cosine Corrector

Integrating Spheres and Cosine Corrector
1Pages

Catalog excerpts

Integrating Spheres and Cosine Corrector - 1

1266 Phone: 1-800-222-6440 • Fax: 1-949-253-1680 S p e c t r o s c o p y I n s t r u m e n t s MONOCHROMATORS AND SPECTROGRAPHS BENCHTOP SPECTROMETERS MINISPECTROMETERS SINGLE CHANNEL DETECTION SYSTEMS AND CCD CAMERAS ACCESSORIES FOR FT-IR SPECTROMETERS SPECTROSCOPY INSTRUMENTS Integrating Spheres and Cosine Corrector Reflectance and Irradiance Integrating Spheres The integrating spheres and cosine corrector described here are for use with the OSM (page 1253) and IS Series (page 1250) of Minispectrometers. For flanged integrating spheres that couple directly to Oriel Light Sources, Monochromators or Detectors, refer to page 1295. Integrating Spheres The reflectance spheres measure total integrated reflectance from a surface. They have two SMA connectors: one at 90° to connect to the spectrometer, and one at 8° for the illumination source. For irradiance measurements (i.e. lamp or LED characterization) use the irradiance sphere. This sphere acts like a cosine corrector, but is designed specifically for measuring the irradiance from a directed light source. Use a cosine corrector when measuring 180° irradiance (i.e. room light). Integrating Sphere Specifications SPH-IRR-12.5 SPH-REFL-30 SPH-REFL-50 Measurement Type Irradiance Reflection Reflection Internal Diameter 12.5 mm 30 mm 50 mm Housing Dimension 25 x 25 x 22 mm 50 x 50 x 45 mm 68 x 68 x 58 mm Sample Port Diameter 5 mm 7 mm 10 mm Connection 1 SMA connector 90° geometry 2 SMA connectors 90° & 8° geometry 2 SMA connectors 90° & 8° geometry Spectral Range 200 - 2400 nm 200 - 2400 nm 200 - 2400 nm Reflectivity 95% 95% 95% (with 400 ìm fiber) Throughput (with 400 ìm fiber) 78.27 30.11 CRP-IRR Cosine Corrector Cosine Corrector For irradiance measurements from widely diverging light sources, use a cosine corrector. The CRP IRR collects radiation from a 180° solid angle. It couples directly to any SMA terminated fiber. The CRP IRR uses a PTFE diffusing material, which is usable from 200 to 1100 nm. It has a 6.35 mm OD barrel dimension. Ordering Information Model Description SPH-IRR-12.5 Irradiance Integrating Sphere SPH-REFL-30 30 mm Reflection Integrating Sphere SPH-REFL-50 50 mm Reflection Integrating Sphere CRP-IRR Cosine Corrector See our website WEBfor more info

Open the catalog to page 1