Catalogs >
MICRO-CONTROLE / Spectra-Physics >
High Resolution CCD Laser Beam Profiler

High Resolution CCD Laser Beam Profiler
1Pages

Catalog excerpts

High Resolution CCD Laser Beam Profiler - 1

1158 Phone: 1-800-222-6440 • Fax: 1-949-253-1680 L i g h t Te s t a n d M e a s u r e m e n t s I n s t r u m e n t s BEAM ANALYSIS POWER AND ENERGY METERS DETECTORS High Resolution Laser Beam Profiler Newport's new LBP-HR Laser Beam Profiler offers true 12 bit dynamic range, and a 1.4 Megapixel CCD for detailed profiles and analysis of most laser sources. The LBP-HR is a powerful software driven device with complete beam diagnostic measurement features, including a multi-measurement routine to increase signal integrity for higher accuracy results. For continuous or pulsed laser beams, it provides an extensive range of graphical presentations and analysis capabilities of laser beam parameters such as: beam width, shape, position, power and intensity profiles. The LBP-HR includes NG4, NG9, and NG10 attenuators that thread into the camera aperture for power reduction of the input beam. The LBP-HR communicates with the PC software with USB, and is powered by the USB port on your PC, so no need for and an external AC adapter. This user-friendly system presents graphical and numerical information for an intuitive interpretation of data in real-time. • Real-time beam size and Gausian fit • 350-1310nm spectral response • 2D/3D intensity plots and X and Y profiles • Beam centroid tracking and charting • Software controlled shutter and gain • Detailed statistics and analysis tools • High Speed USB 2.0 Specifications Model LBP-HR CCD Laser Beam Profiler CCD Type 1.4 Megapixel CCD Resolution 12 bit Operating Modes 1) Interline camera mode for CW operation and 2) frame transfer mode for pulsed operation. Sensor Size [in. (mm)] 0.30 x 0.24 (7.6 x 6.2) Spectral Response (nm) 350 - 1310 Dimensions [in. (mm)] 2.9 x 2.1 x 2.5 (73 x 54 x 64) Sync out for triggering laser Female RCA Connector Computer Interface USB 2.0 Minimum Computer System Requirements (for USB Operation) Pentium 4, 1 GHz, 128MB RAM 10MB HD free, Windows 2000/XP 16MB 16 bit color VGA card, one CD ROM drive One free High Speed USB 2.0 port 1024 x 768 resolution VGA display System Performance with Software Dynamic Range, not including filters (dB) 60 Shutter Speeds (sec) 0.000001 to 0.6 Software Controlled Gain 1x to 23x Maximum Frame Rate (f/ps) 15 @ 1392x1040 Lowest Measurable Signal About 5 nW/cm2 at 633 nm Saturation Intensity 2 mW/cm2 Damage Threshold 50 W/cm2 (1 J/cm2) with all filters installed (3xNG10) Handling of Pulses Ability to capture and replay pictures and statistics from a slowly pulsing laser (1 - 100 Hz) while filtering out frames with no laser pulse. Gain control and external filters make it easy to obtain optimum intensity. Provision for displaying single shot pulses. Trigger In pulsed mode, sliding bar control allows setting of threshold so as to display only frames with captured pulses. Max. Frequency for Single Pulse Display (kHz) 10 Ordering Information Model Description LBP-HR High Resolution, 1.4 Megapixel CCD Beam Profiler, 350-1310nm Please see Newport.com for optional accessories, and additional information.

Open the catalog to page 1