Catalogs >
MICRO-CONTROLE / Spectra-Physics >
High Power Spectral Calibration Lamps

High Power Spectral Calibration Lamps
2Pages

Catalog excerpts

High Power Spectral Calibration Lamps - 1

78 Phone: 1-800-222-6440 • Fax: 1-949-253-1680 L i g h t S o u r c e s TECHNICAL REFERENCE MONOCHROMATOR AND INCANDESCENT SOURCES ARC SOURCES DEUTERIUM SOURCES CALIBRATION SOURCES FIBER ILLUMINATORS PHOTOLITHOGRAPHY SOLAR SIMULATORS INSTRUMENTS ACCESSORIES FOR ORIEL LIGHT SOURCES Oriel High Power Spectral Calibration Lamps 65130 and 65010 High Power Spectral Line Lamps Choose these sources if you require very intense, discrete spectral lines. These lamps are approximately 2X more intense than comparable pencil calibration lamps (see page 75), although the spectral intensity distribution is very different. The lamps are housed in the 65160 Lamp Housing, which has an integrated filter holder to hold 1.0 inch (25.4 mm) diameter interference filters, and powered by the 65150 Regulated AC Power Supply. Because the power supply operates in regulated AC mode, there are rapid variations in output on an ms time scale. However, the average output over many seconds is very stable. 65060 HgCd 65010 Cs 65020 He 65130 Hg 65080 Na 65090 Ne 65110 Tl 65120 Zn 65130 Hg 250 250 300 300 350 350 400 400 450 500 550 600 650 nm nm 237.8 240.0 253.7 253.6 265.4 275.3 289.4 296.8 312.6 334.1 365.0/6.3 390.6 WAVELENGTH (nm) 250 300 350 400 450 500 550 600 650 nm SPECTRAL LINES BELOW 400 nm SPECTRAL LINES ABOVE 400 nm Fig. 1 Output spectra of High Power Spectral Calibration Lamps. 65160 Lamp Housing on 66275 Z Bracket. Z Bracket Lowers Optical Axis Height The 66275 Z Bracket lets you rod mount the 65160 Lamp Mount at a low optical axis height to match our monochromator inputs. The lowest centerline height with this mount is 2.8 inches (71 mm). See page 244 for more details on the 66275. Safety Considerations Although these are low wattage sources, they still emit hazardous UV radiation. Be sure to wear protective eyewear and gloves (see page 246 for UV safety equipment). • Sources of intense, discrete UV, VIS and NIR spectral lines • Highly stable long-term output • Low cost rod mounted housing supports lamps • Easily interchangeable lamps

Open the catalog to page 1

High Power Spectral Calibration Lamps - 2

79 Email: sales@newport.com • Web: newport.com L i g h t S o u r c e s TECHNICAL REFERENCE CALIBRATION SOURCES DEUTERIUM SOURCES ARC SOURCES INCANDESCENT SOURCES MONOCHROMATOR AND FIBER ILLUMINATORS SOLAR SIMULATORS PHOTOLITHOGRAPHY INSTRUMENTS ACCESSORIES FOR ORIEL LIGHT SOURCES Specifications Power Supply Starting Voltage 600 V peak to peak for ca. 350 ms Operating Voltage 10 - 60 V, lamp dependent Operating Current 0,6 - 1 A, lamp dependent Input 115 V / 2.4 A or 230 V / 1.2 A Weight 18.2 System Line Regulation (<1 Hz) <±1% for ±10% change in line voltage Ordering Information Spectral...

Open the catalog to page 2

High Power Spectral Calibration Lamps 2Pages

Catalog excerpts

All MICRO-CONTROLE / Spectra-Physics catalogs and technical brochures

High Power Spectral Calibration Lamps
2Pages