video corpo

Flange Mounted Cells

Flange Mounted Cells

Product catalog summary
Technical Reference Overview
This document provides technical specifications and recommendations for various light sources and accessories, including calibration sources, deuterium sources, arc sources, incandescent sources, monochromators, fiber illuminators, solar simulators, and photolithography instruments.

Oriel Flange Mounted Cells
These mounts are designed with a 1.5-inch series female-flange on one end and a male-flange on the other, suitable for holding optical accessories at the input or output of light sources and other flanged instruments.

Types of Mounts
  • Set Screw Models: These models use three set screws to couple to male-flanged components, ensuring a light-tight connection.
  • Quick Connect Models: Ideal for setups that require frequent assembly and disassembly, these models snap on and off without additional hardware.

Features
  • Create light-tight optical paths.
  • Available in economical set screw and convenient quick connect models.
  • Allow coupling of various cells in series.

Ordering Information
The document includes a table with model numbers, flange types, optic diameters, maximum optic thickness, and clear aperture dimensions for different models of flange mounted cells. For example, Model 7123 is a set screw type with a 1.0-inch optic diameter and a clear aperture of 0.8 inches.
See more

Catalog excerpts

Flange Mounted Cells  -1

234 Phone: 1-800-222-6440 • Fax: 1-949-253-1680 L i g h t S o u r c e s TECHNICAL REFERENCE MONOCHROMATOR AND INCANDESCENT SOURCES ARC SOURCES DEUTERIUM SOURCES CALIBRATION SOURCES FIBER ILLUMINATORS PHOTOLITHOGRAPHY SOLAR SIMULATORS INSTRUMENTS ACCESSORIES FOR ORIEL LIGHT SOURCES Oriel Flange Mounted Cells Flange Mounted Cells These simple mounts have a 1.5 inch series female-flange on one end and a male-flange on the other. They are ideal for holding optical accessories at the input or output of our light sources, monochromators and other flanged instruments. Set Screw and Quick Connect Type For set-ups that will be broken down frequently, we recommend using a Quick Connect model. These snap on and off maleflanged components without the need for hardware. The set screw models couple to male-flanged components via three set screws. Both types are light tight. • Create light tight optical paths • Economical set screw and convenient quick connect models • Couple various cells in series OPTIC DIAMETER CLEAR APERTURE 1/4-20 TAPPED HOLE 1.5 INCH SERIES MALE FLANGE 1.5 INCH SERIES SET SCREW OR QUICK CONNECT FEMALE FLANGE Fig. 1 Diagram of Oriel Flange Mounted Cell Ordering Information Model Flange Type Optic Diameter Max Optic Thickness inch (mm) Clear Aperture 7123 Set Screw 1.0 (25.4) 0.38 (9.5) 0.8 (20) 71306 Quick Connect 1.0 (25.4) 0.38 (9.5) 0.8 (20) 6195 Set Screw 1.5 (38.1) 0.43 (11) 1.4 (35) 77660 Quick Connect 1.5 (38.1) 0.43 (11) 1.4 (35) 6213 Set Screw 2 (50.8) 0.94 (24) 1.5 (38) See our website WEBfor more info

 Open the catalog to page 1

All MICRO-CONTROLE / Spectra-Physics catalogs and technical brochures

  1. 10BPF10-310

    1  Page

  2. M-401

    1  Page

  3. newport ressource

    1640  Pages

  4. Motion PL30

    24  Pages

  5. Nanopositioners

    40  Pages

  6. Beamsplitters

    34  Pages

  7. Optrical mirror

    33  Pages

  8. Motion System

    2  Pages

  9. Base Clamps

    1  Page

  10. Rod Clamps

    1  Page

  11. V-Blocks

    1  Page

  12. Blackbodies

    2  Pages

  13. Beam Dump

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.