Catalogs >
MICRO-CONTROLE / Spectra-Physics >
DTGS Detectors for Oriel MIR8025™ FT Spectrometers

DTGS Detectors for Oriel MIR8025™ FT Spectrometers
1Pages

Catalog excerpts

DTGS Detectors for Oriel MIR8025™ FT Spectrometers - 1

1290 Phone: 1-800-222-6440 • Fax: 1-949-253-1680 S p e c t r o s c o p y I n s t r u m e n t s MONOCHROMATORS AND SPECTROGRAPHS BENCHTOP SPECTROMETERS MINISPECTROMETERS SINGLE CHANNEL DETECTION SYSTEMS AND CCD CAMERAS ACCESSORIES FOR FT-IR SPECTROMETERS SPECTROSCOPY INSTRUMENTS DTGS Detectors for Oriel MIR8025TM FT Spectrometers DTGS Detectors are sensitive from 6,000 to 350 cm-1 (1.7 to 28 ìm), the usable range of the KBr beam splitter. This detector exhibits large, spontaneous electrical polarization effects. Incident radiation alters the polarization which generates the electrical signal. We optimize this detector for our 80007 SiC Source (described on page 145); fine gain adjustments can be made via an internal potentiometer. • Broadest spectral response, 6,000 to 350 cm-1 • Room temperature operation 1000 2000 3000 4000 5000 6000 7000 8000 WAVENUMBER (cm-1) NORMALIZED SIGNAL 1.0 0.8 0.6 0.4 0.2 0 1.0 0.8 0.6 0.4 0.2 0 0 0 1000 2000 3000 4000 5000 6000 7000 8000 WAVELENGTH (ìm) 5.0 2.5 1.66 1.25 5.0 2.5 1.66 1.25 80008 DTGS DETECTOR WITH CaF2 BEAM SPLITTER 80008 DTGS DETECTOR WITH KBr BEAM SPLITTER Fig. 1 Spectrum of 1273 K blackbody captured with 80008 DTGS Detector, CaF2 beam splitter was used to acquire the top measurement; a KBr beam splitter was used for the bottom measurement. Specifications Responsivity Range 6,000 - 350 cm-1 (1.7 - 28 ìm) Detector Element Size 1 x 1 mm Window Material KBr Preferred Beam Splitter KBr Typical D* 1.5 x 109 to 3.5 x 109 Operating Bandwidth (with amplifier) 100 Hz to 40 kHz optimized for 5 kHz Ordering Information Model Description 80008 DTGS Detector See our website WEBfor more info 80008 DTGS Detector at output of MIR 8025™ Scanner.

Open the catalog to page 1