Catalogs >
MICRO-CONTROLE / Spectra-Physics >
Apex Infrared Light Sources

Apex Infrared Light Sources
2Pages

Catalog excerpts

143 Email: sales@newport.com • Web: newport.com L i g h t S o u r c e s TECHNICAL REFERENCE CALIBRATION SOURCES DEUTERIUM SOURCES ARC SOURCES INCANDESCENT SOURCES MONOCHROMATOR AND FIBER ILLUMINATORS SOLAR SIMULATORS PHOTOLITHOGRAPHY INSTRUMENTS ACCESSORIES FOR ORIEL LIGHT SOURCES Specifications Power Supplies for 40 - 250 W Quartz Tungsten Halogen Lamps Power Supplies for 160 - 1100 W Quartz Tungsten Halogen Lamps Power Factor >0.99 >0.99 Input Voltage 90 - 264 VAC 95 - 264 VAC Input Current 5 A 15 A Input Frequency 47 - 63 Hz 47 - 63 Hz Output Power Lamp Dependent Lamp Dependent Output Current Lamp Dependent Lamp Dependent Output Voltage (open circuit) 50 VDC 150 VDC Output Voltage (loaded) 0-45 VDC 0 -140 VDC Line Regulation 0.01 % 0.01 % Output Voltage Ripple <0.05 % r.m.s. < 0.05 % r.m.s. Light Ripple <0.05 % r.m.s. <0.05 % r.m.s. Safety Interlock Voltage 12 VDC/GND 12 VDC/GND Ambient Operating Temperature 0 - 45 °C 0 - 45 °C Weight 20 lb ( 9 kg ) 20 lb ( 9 kg ) Dimensions (W x D x H) [in. (mm)] 12.0 x 16.0 x 5.18 () 12.0 x 16.0 x 5.18 () Ordering Information Please contact a Sales Engineer to discuss your needs. See our website WEBfor more info Oriel Apex Infrared Sources 66470 Apex Infrared Source. New! Oriel Apex Sources with a Rear Reflector are now available. Potentially up to 60 % throughput improvement can be achieved as a portion of the backwards emitted radiation is captured to the output. The Oriel Apex Infrared Sources operate our 9 to 24 W infrared elements. These systems are completely contained - all the electronics, infrared source and condensing lens assembly are built into the enclosure. We designed these systems with simplicity and economy in mind. By integrating all the components, we were able to keep costs down and simplify operation, with some compromise in flexibility. No Adjustments Necessary These systems are truly plug-and-play. The electronics are factory pre-set to operate the specified element, so you don't need to adjust the current. You don't even need to align the infrared element. Simply install the element, turn on the power, and begin your work. For those Researchers who wish to retain some flexibility, we also offer systems based on the popular Series Q Housing, which allows you to interchange elements and condensing lens assemblies (see page 104 for information on the Series Q). • New! Oriel Apex Sources with a Rear Reflector available • Efficient, economical and simple to operate IR sources • Run 9 to 24 W IR elements • Large diameter, 1.3-inch, collimated output beam

Open the catalog to page 1

144 Phone: 1-800-222-6440 • Fax: 1-949-253-1680 L i g h t S o u r c e s TECHNICAL REFERENCE MONOCHROMATOR AND INCANDESCENT SOURCES ARC SOURCES DEUTERIUM SOURCES CALIBRATION SOURCES FIBER ILLUMINATORS PHOTOLITHOGRAPHY SOLAR SIMULATORS INSTRUMENTS ACCESSORIES FOR ORIEL LIGHT SOURCES Zinc Selenide Condenser The output of our Apex Sources is a collimated, 1.3-inch (33 mm) diameter beam. The condenser is an F/2 Zinc Selenide assembly; ZnSe transmits from 0.6 to 12 ìm. The output flange of Apex is a 1.5-Inch Series female flange. Any 1.5-Inch series male-flanged accessory mates directly to the...

Open the catalog to page 2

Apex Infrared Light Sources 2Pages

Catalog excerpts

All MICRO-CONTROLE / Spectra-Physics catalogs and technical brochures

Apex Infrared Light Sources
2Pages