cad

Apex Fiber Illuminators
2Pages

{{requestButtons}}

Catalog excerpts

Apex Fiber Illuminators - 1

157 Email: sales@newport.com • Web: newport.com L i g h t S o u r c e s TECHNICAL REFERENCE CALIBRATION SOURCES DEUTERIUM SOURCES ARC SOURCES INCANDESCENT SOURCES MONOCHROMATOR AND FIBER ILLUMINATORS SOLAR SIMULATORS PHOTOLITHOGRAPHY INSTRUMENTS ACCESSORIES FOR ORIEL LIGHT SOURCES Oriel Apex Fiber Illuminators 70529 Apex Fiber Illuminator. New! Oriel Apex Sources with a Rear Reflector are now available. Potentially up to 60 % throughput improvement can be achieved. The Apex family of broadband fiber illuminators uses refractive optics to ensure superior beam quality and efficiency. These systems are compact in size, economically priced, and very simple to operate. A built-in four-position filter slide holds bandpass or neutral density filters. We offer systems to operate deuterium, arc and quartz tungsten halogen lamps, and infrared elements. Each system is factory pre-set to run the specified lamp, and includes a pre-aligned lamp base. No adjustments are required. Produce Tightly Focused Spot Sizes Fig. 1 shows the optical path of an Arc Lamp Apex Fiber Illuminator (other versions operate in the same manner). For the D2, arc and QTH lamp systems, we use a fused silica aspheric lens assembly. For the IR Apex Systems, we use a ZnSe aspheric lens assembly, which transmits from 0.6 to 12 ìm. Our IR elements emit to 25 ìm. If you are working in the longer wavelengths, contact a Sales Engineer to replace the ZnSe lens assembly with a Germanium Assembly. We chose aspheric lenses because of their superior aberration correction and imaging qualities. These computer designed lens systems are made up of two lens elements. The first lens collimates the source, and the second lens focuses the output to a tightly focused spot size. Arc Lamp 4-Position Filter Slide Fan Fiber Bundle Holder Fig. 1 Optical path of Arc Lamp Apex Fiber Illuminator. Built-in Filter Slide These illuminators include a four position filter slide, which holds 1-inch diameter (25.4 mm) filters, up to 0.2 inches (5 mm) thick. The slide can be inserted and removed without removing the illuminator's cover. An interlock switch shuts down power to the system when the slide is removed. The filter slide must be installed for the instrument to operate. You can buy additional filter slides if you need to switch between more than four filters (note: the illuminator can only support one slide at a time). Each filter position is numbered for easy filter identification. • New! Oriel Apex Sources with a Rear Reflector available • Tightly focused output matched to fibers • Efficient, compact and fully integrated systems • Built-in 4 position filter slide • Operate deuterium, arc, EmArc™, quartz tungsten halogen and infrared sources to 200 W Specifications Lens Multiplication Factor * 0.05 Light Ripple <0.5 % r.m.s. Line Regulation 0.1 % AC Input 95 - 132 V/2A 190 - 264 V/1A 50 - 60 Hz * The multiplication factor is a measured parameter that helps in computing the approximate total power of the output in any wavelength band, see page 69 for examples and formulae to compute the approximate output power from your source. Apex Fiber Illuminators do not have a rear reflector. Do not include the 60% rear reflector contribution when calculating the output from these sources. See our website WEBfor more info

Open the catalog to page 1
Apex Fiber Illuminators - 2

158 Phone: 1-800-222-6440 • Fax: 1-949-253-1680 L i g h t S o u r c e s TECHNICAL REFERENCE MONOCHROMATOR AND INCANDESCENT SOURCES ARC SOURCES DEUTERIUM SOURCES CALIBRATION SOURCES FIBER ILLUMINATORS PHOTOLITHOGRAPHY SOLAR SIMULATORS INSTRUMENTS ACCESSORIES FOR ORIEL LIGHT SOURCES Ordering Information Apex Fiber Illuminators Each Illuminator includes a fiber adapter for 11 mm terminated fibers. For SMA or ST terminated fibers, order the appropriate connector from the Accessories Table. * The 70543 operates any of our D2 lamps (models 70620, 70621, 70622, 70623 or 70624). Please specify your...

Open the catalog to page 2

All MICRO-CONTROLE / Spectra-Physics catalogs and technical brochures

  1. 10BPF10-310

    1 Pages

  2. M-401

    1 Pages

  3. newport ressource

    1640 Pages

  4. Motion PL30

    24 Pages

  5. Beamsplitters

    34 Pages

  6. Base Clamps

    1 Pages

  7. Rod Clamps

    1 Pages

  8. V-Blocks

    1 Pages

  9. Blackbodies

    2 Pages

  10. Beam Dump

    1 Pages