1. Catalogs
  2. MICRO-CONTROLE / Spectra-Physics
  3. Agilis™ Series Piezo Motor Driven Positioners
video corpo

Agilis™ Series Piezo Motor Driven Positioners

Agilis™ Series Piezo Motor Driven Positioners

Agilis™ Series Piezo Motor Driven Positioners

Product catalog summary
Introduction
The Agilis™ Series Piezo Motor Driven Positioners by Newport are designed for precise and repeatable positioning in optical setups, offering high adjustment sensitivity and remote operation capabilities.

Product Overview
The series includes mirror mounts for 0.5” and 1” optics, linear stages, a rotation stage for polarization optics, and control electronics. Future expansions will include DUV-compatible mirror mounts, gimbal mounts, and lens positioners.

Advantages
  • Remote hands-off adjustment
  • 50 nm adjustment sensitivity
  • Compact design for tight spaces
  • Long-term stability with set-and-forget capability
  • Manual control and USB interface
  • Absolute positioning with integrated limit switches


Technical Specifications
Agilis Motors: Non-resonant piezo direct motor with direct coupling, offering longer life, higher speeds, and freedom from backlash or hysteresis, with 50 nm incremental motion capability.
AG-M100 Mirror Mount: Less than 10 µrad drift over 13 hours, with a thermal tilt of 4 µrad/°C.
AG-LS25 Linear Stage: 12 mm travel, 0.05 µm minimum incremental motion, and a maximum speed of 0.5 mm/s without axial load.
AG-PR100 Rotation Stage: 360° continuous rotation with a minimum incremental motion of 5 µrad.

Applications
Ideal for stable, sensitive, small, and easy-to-adjust opto-mechanics, suitable for vacuum or clean room environments, with models tested up to 10-6 hPa vacuum.

Ordering Information
Various models available, including vacuum-compatible versions and those with limit switches for absolute positioning. Accessories such as extension cables, adapter plates, and controllers are also offered.

Conclusion
The Agilis™ Series offers a cost-effective solution for precise optical adjustments, combining motorized and manual positioner benefits in a compact form.
See more

Catalog excerpts

Agilis™ Series Piezo Motor Driven Positioners-1

Agilis™ Series Piezo Motor Driven Positioners MAKE LIGHT | MANAGE LIGHT | MEASURE LIGHT

 Open the catalog to page 1
Agilis™ Series Piezo Motor Driven Positioners-2

Phone: 1-800-222-6440 • Fax: 1-949-253-1680 • Email: [email protected] • Web: newport.com Agilis™ Series Piezo Motor Driven Positioners 2 Why Agilis positioners? Achieving precise adjustment and repeatable positioning of optical setups can be difficult and time consuming. Newport’s new Agilis series of piezo motor driven positioners takes a new approach to the adjustments needed for many laser setups. The Agilis series provides the ultra-high adjustment sensitivity and convenient remote operation of a motorized positioner at the economy and size of a high quality manual mount! Today, the Agilis...

 Open the catalog to page 2
Agilis™ Series Piezo Motor Driven Positioners-3

Phone: 1-800-222-6440 • Fax: 1-949-253-1680 • Email: [email protected] • Web: newport.com Agilis™ Series Piezo Motor Driven Positioners 3 Motorized positioners overcome the limits of manual positioners, but are typically costly and bulky, restricting their use for systems integration or simple remote operation in tight spaces. Agilis™ positioners provide a lower cost solution in a miniature size, without compromising adjustment sensitivity, speed, or position stability. Agilis motors features Newport’s new, patent pending, non-resonant piezo direct motor. The motor consists of a piezoelectric...

 Open the catalog to page 3
Agilis™ Series Piezo Motor Driven Positioners-4

Phone: 1-800-222-6440 • Fax: 1-949-253-1680 • Email: [email protected] • Web: newport.com 4 Agilis™ Series Piezo Motor Driven Positioners For repeatable absolute positioning, most positioners are available with precision electrical limit switches. These switches not only act as safety devices, they also allow repeatable absolute positioning without the need for expensive encoder feedback. This is accomplished by measuring the average step size from the left to the right travel limits and vice versa. Under consistent environmental conditions, the step size is fairly repeatable. Together with high...

 Open the catalog to page 4
Agilis™ Series Piezo Motor Driven Positioners-5

Phone: 1-800-222-6440 • Fax: 1-949-253-1680 • Email: [email protected] • Web: newport.com Agilis™ Series Piezo Motor Driven Positioners 5 Agilis™ AG-M050 and AG-M100 mirror mounts The AG-M050 and AG-M100 are kinematic mirror mounts for optics with 0.5” and 1” diameter, respectively. For maximum compatibility, they feature the same optical beam height and almost the same lateral dimensions as Newport’s popular Ultima® and Suprema® series manual mounts, but are narrower. The patented clear quadrant design exposes the edge of the optic, allowing beams to pass close to the edge of a mounted optic....

 Open the catalog to page 5
Agilis™ Series Piezo Motor Driven Positioners-6

Phone: 1-800-222-6440 • Fax: 1-949-253-1680 • Email: [email protected] • Web: newport.com Agilis™ Series Piezo Motor Driven Positioners 6 Agilis™ AG-LS25 linear stage Specifications Travel Range (mm) 12 Minimum Incremental Motion (ìm) (1) 0.05 Absolute positioning accuracy (ìm) (2) 100 Maximum Speed (mm/s) >0.5 with no axial load >0.2 with 1.7 N axial load Normal load capacity (N) 3 (max. 40 mm cantilever) Holding force (N) 3 Axial load capacity (N) 2 Pitch, Yaw (ìrad) 100 Material Stainless steel Weight [oz (g)] 2.5 (70) Cable 1.2 m length, 4-wire mini-Din connector. Can extend cable length...

 Open the catalog to page 6
Agilis™ Series Piezo Motor Driven Positioners-7

Phone: 1-800-222-6440 • Fax: 1-949-253-1680 • Email: [email protected] • Web: newport.com Agilis™ Series Piezo Motor Driven Positioners 7 Specifications Agilis™ AG-PR100 Rotation stage The AG-PR100 is an ultra-compact and lightweight rotation stage providing 360° continuous rotation for 1” diameter waveplates and polarizers. The inside diameter of the AGPR100 comes with a 1.063”-20 thread and is compatible with the 10GT and 10GL series Calcite polarizers, the CH- 0.5 cube beamsplitter holder, and the RSA-1TI thread insert. An A-1.25-1RR retainer ring is included with every stage. Travel Range...

 Open the catalog to page 7
Agilis™ Series Piezo Motor Driven Positioners-8

PHONE EMAIL Belgium +32-(0)0800-11 257 [email protected] China +86-10-6267-0065 [email protected] France +33-(0)1-60-91-68-68 [email protected] Italy +39-02-92-90-921 [email protected] Japan +81-3-3794-5511 [email protected] Taiwan +886 -(0)2-2508-4977 [email protected] PHONE EMAIL Mtn. View, USA +1-800-775-5273 [email protected] Netherlands +31-(0)30 6592111 [email protected] United Kingdom +44-1235-432-710 [email protected] Germany / Austria / Switzerland +49-(0)6151-708-0 [email protected] Complete listings for all global office locations are available online at...

 Open the catalog to page 8

All MICRO-CONTROLE / Spectra-Physics catalogs and technical brochures

  1. 10BPF10-310

    1  Page

  2. M-401

    1  Page

  3. newport ressource

    1640  Pages

  4. Motion PL30

    24  Pages

  5. Nanopositioners

    40  Pages

  6. Beamsplitters

    34  Pages

  7. Optrical mirror

    33  Pages

  8. Motion System

    2  Pages

  9. Base Clamps

    1  Page

  10. Rod Clamps

    1  Page

  11. V-Blocks

    1  Page

  12. Blackbodies

    2  Pages

  13. Beam Dump

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.