Catalogs >
MICRO-CONTROLE / Spectra-Physics >
Accessories Controller/Driver Cables

Accessories Controller/Driver Cables
1Pages

Catalog excerpts

Accessories Controller/Driver Cables - 1

855 Email: sales@newport.com • Web: newport.com M o t o r i z e d P o s i t i o n i n g TECHNICAL REFERENCE MOTORIZED LINEAR STAGES MOTORIZED ROTATION STAGES MOTORIZED OPTICAL MOUNTS MOTORIZED ACTUATORS CONTROLLERS AND AMPLIFIERS SYSTEMS Stage Motors Stage Motor Technical Information Accessories For applications where the standard 3m cable included with your stage is not adequate, Newport offers longer length cables designed to ensure the integrity of your positioning application. These cables are specially shielded and terminated with Newport’s standard 25-pin or 15-pin D-Sub connectors. Compatibility Please contact Newport to check the signal-compatibility of cable lengths over 5 meters. Ordering Information Model Description MMCABLE-3 3 m Cable, DB-25 Male - DB-25 Female MMCABLE-5 5 m Cable, DB-25 Male - DB-25 Female MMCABLE-7* 7 m Cable, DB-25 Male - DB-25 Female MMCABLE-10* 10 m Cable, DB-25 Male - DB-25 Female MMCABLE-REG 5 V Regulator MSCABLE-3 3 m Cable, DB-25 Male - DA-15 Female MSCABLE-10 10 m Cable, DB-25 Male - DA-15 Female * MMCABLE-REG requried to ensure a high quality, regulated 5 V supply to the stage. For best efficiency, this regulator should be set on the stage connector to re-adjust the 5 volts coming from the controller through the long cable. STEPPER MOTOR CONNECTORS PIN FUNCTION 1 MOTOR PH 1 2 MOTOR PH 1 3 MOTOR PH 2 4 MOTOR PH 2 5 MOTOR PH 3 6 MOTOR PH 3 7 MOTOR PH 4 8 MOTOR PH 4 9 COMM. 3-4 11 COMM. 1-2 13 ORIGIN 14 SHLD GND PIN FUNCTION 15 INDEX 16 LIMIT GROUND 17 + TRAVEL LIMIT 18 – TRAVEL LIMIT 19 ENCODER A 20 ENCODER B 21 +5 VOLTS 22 ENCODER GROUND 23 ENCODER A 24 ENCODER B 25 /INDEX DC MOTOR CONNECTORS PIN FUNCTION 1 TACHOMETER + 2 TACHOMETER + 3 TACHOMETER – 4 TACHOMETER – 5 MOTOR + 6 MOTOR + 7 MOTOR – 8 MOTOR – 13 ORIGIN 14 SHLD GND 15 INDEX PIN FUNCTION 16 LIMIT GROUND 17 + TRAVEL LIMIT 18 – TRAVEL LIMIT 19 ENCODER A 20 ENCODER B 21 +5 VOLTS 22 ENCODER GROUND 23 ENCODER A 24 ENCODER B 25 /INDEX • Standard interface between Newport ESP compatible stepper and DC motor stages and controllers • Shielded to protect sensitive signals • Longer standard lengths to replace 3 m cable included with stages DB-25 13 1 25 14 All motorized Newport stages are optimized for use with Newport’s motion controllers and motor drivers to ensure plug-and-play compatibility, reliability and the ability to meet stated stage performance specifications. Occasionally, however, our controllers may not be appropriate for your specific application. In cases like these, the specific motor specifications are included in the motorized stage manual to facilitate using non-Newport controllers and drivers. In so doing, Newport cannot guarantee achieving the published performance specifications or reliability and cautions users to ensure that all motion requirements are well understood before proceeding. To avoid accidental damage to Newport stages and motors, we do not recommend using this information unless you are very familiar with motion controller electronics and motor driver design. Please consult our Applications Engineers for more information. To download stage manuals, visit: ftp://download.newport.com/MotionControl/Current/PositionerManuals/ Controller/Driver Cables

Open the catalog to page 1

Accessories Controller/Driver Cables 1Pages

Catalog excerpts

All MICRO-CONTROLE / Spectra-Physics catalogs and technical brochures

Accessories Controller/Driver Cables
1Pages