*mydirectindustry

Catalogs
MICRO-CONTROLE / Spectra-Physics
30 Series Multi-Axis Tilt Platforms

30 Series Multi-Axis Tilt Platforms

Product catalog summary

Overview: This document provides detailed specifications and descriptions of manual positioning equipment, specifically focusing on tilt and rotation platforms, fiber alignment, actuators, and linear stages. The primary models discussed are the 30 Series Tilt and Rotation Platforms, including Models 36, 37, and 39, as well as the 488 Series Lab Jack with Rotary Platform.

30 Series Tilt and Rotation Platforms:

Model 36 (M-36): Offers 1-axis tilt and rotation with two SM-13 micrometers. It provides an elevation tilt adjustment and rotation about the kinematic pivot point, suitable for azimuth adjustments.
Model 37 (M-37): Provides full three-axis angular orientation freedom with two tilt adjustments and rotation, allowing components to be oriented parallel to an arbitrary plane. It offers six degrees of freedom when used with an XYZ stage.
Model 39: Features two axes of angular adjustments with 40-pitch adjustment screws, allowing components to be oriented parallel to an arbitrary plane.

Specifications:

Tilt Range: Varies by model, with Model 36 offering -4.3° to +7°, Model 37 offering ±4°, and Model 39 offering -3.5° ±14° along the long axis and -5° ±16° along the short axis.
Rotation Range: Model 36 offers ±2.5°, Model 37 offers ±4°, and Model 39 does not have a specified rotation range.
Load Capacity: All models support a load capacity of 15 lb (66.7 N).

488 Series Lab Jack with Rotary Platform:

Features a high-resolution vertical lab jack with a large mounting platform and lockable motion, designed to eliminate backlash and provide stability.
Offers non-rotating vertical travel over 1 inch (25.4 mm) with 0.01 mm graduations and a lockable rotating platform with 2° graduations.
Specifications: Maximum stage travel of 1.0 inch (25.4 mm), minimum height of 2.0 inches (50.8 mm), and a static load capacity of 150 lb (667 N).

Key Features:

Stable, kinematic designs with large angular ranges.
Generous array of mounting holes for versatile applications.
High-resolution models with independent, lockable vertical and rotary motions.

Catalog excerpts

917 Email: [email protected] • Web: newport.com M a n u a l P o s i t i o n i n g MANUAL ROTATION AND TILT STAGES MANUAL LINEAR STAGES MANUAL ACTUATORS MANUAL FIBER ALIGNMENT 30 Series Tilt and Rotation Platforms 36 (M-36) 37 (M-37) 39 These multi-axis tilt platforms provide tilt and rotation adjustments for aligning optical components. They are kinematic, with hardened and polished steel ball pivots and spring-preloaded spherical-tipped adjustments acting on hardened steel seats. Model 36 has an elevation tilt adjustment and a rotation adjustment that rotates the mounting platform about the kinematic pivot point — ideal for use as a pointer. With components mounted on the same face as the micrometers, the rotation provides an azimuth adjustment; components mounted on the opposite side are rotated in-plane. Model 37 provides full, three-axis angular orientation freedom. It features two tilt adjustments plus rotation that allow a component to be oriented parallel with an arbitrary plane. When used with an XYZ stage, it provides six degrees of freedom for total positioning capability. Model 39 provides two axes of angular adjustments, allowing a mounted component to be oriented parallel to an arbitrary plane. 40-Pitch adjustment screws provide angular adjustments. Specifications Model 36 (M-36) Model 37 (M-37) Model 39 Tilt Range -4.3° to +7 ° ±4 ° -3.5 ±14°(1)-5 ±16°(2) Rotation Range ±2.5 ° ±4 ° NA Sensitivity (Standard Micrometers) (arc sec) 2 2 11(1)/7(2) Load Capacity [lb (N)] 15 (66.7) 15 (66.7) 15 (66.7) 1) Along long axis 2) Along short axis Ordering Information Model (Metric) Description 36 (M-36) 1-axis tilt, rotation, with two SM-13 micrometers 36S (M-36S) 1-axis tilt, rotation, with two AJS adjustment screws 37 (M-37) 2-axis tilt, rotation, with three SM-13 micrometers 37S (M-37S) 2-axis tilt, rotation, with three AJS adjustment screws 39 2-axis tilt, with two adjustment screws • Stable, kinematic designs • Large angular range • 2 and 3-axis tilt and tilt/rotation versions • 15 lb (66.7 N) load capacity • Generous array of mounting holes Model 36 Model 37 Model 39 Thread Dimensions [in. (mm)] Model (Metric) A B C D 36 (M-36) 1/4-20 (M6) 0.500 (12.5) 0.50 (13.1) 1.00 (25.0) 37 (M-37) 1/4-20 (M6) 0.500 (12.5) Model 39 3 HOLES, 1/4 CLR 16 HOLES, 1.00 1/4-20 TYP 3.00 (76.2) .50 TYP .50 TYP 5.00 (127.0) 1.25 (31.8) 3.00 (76.2) 3.00 (76.2) .50 TYP .50 TYP .50 TYP 1.00 TYP 1.50 .500 TYP 3 HOLES, 1/4 CLR 2 HOLES, 1/4-20 2.50 .500 TYP See our website CADfor CAD files

Open the catalog to page 1

918 Phone: 1-800-222-6440 • Fax: 1-949-253-1680 M a n u a l P o s i t i o n i n g MANUAL FIBER ALIGNMENT MANUAL ACTUATORS MANUAL ROTATION MANUAL LINEAR STAGES AND TILT STAGES Model 36 12 HOLES, THD A B TYP C TYP C TYP B TYP 6 HOLES, THD A 1.44 (36.6) .31 TYP (7.9) 5 HOLES, THD A CLR 4 HOLES, THD A 3.76 (95.5) 3.00 (76.2) C TYP C TYP B TYP B TYP 4.35 (110.4) D B TYP .625 TYP (15.8) 3.50 (88.9) B TYP D TYP .31 TYP (7.9) 4 ACCESS HOLES Model 37 4.50 (114.3) B TYP .875 (22.2) 9 HOLES, THD A CLR B TYP .875 11 HOLES, (22.2) THD A 9 ACCESS HOLES .375 TYP (9.5) 1.5 (38) 3.7 (94) 4.50 (114.3) 9 ACCESS...

Open the catalog to page 2

All MICRO-CONTROLE / Spectra-Physics catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list