*mydirectindustry

Catalogs
MICRO-CONTROLE / Spectra-Physics
163D AIR-COOLED ION LASER SYSTEMS

163D AIR-COOLED ION LASER SYSTEMS

Product catalog summary

Overview: The document provides technical specifications and operational parameters for the Spectra-Physics 163D Air-Cooled Ion Laser Systems, including details on performance, interfaces, and compliance standards.

Performance Specifications: The laser system is classified as a Class 3B laser product with a maximum output of 0.20 W. It features a polarization extinction ratio greater than 100:1 and a nominal longitudinal mode spacing of 638 MHz. The beam waist is located at the output of the laser head.

Operating Parameters: The plasma tube operates between 4 A and 10 A. Cooling requirements include 3.4 m³ (120 CFM) for the laser head and 0.68 m³ (24 CFM) for the power supply. The system operates within a temperature range of 4 – 40˚C and a humidity range of 0 – 95% non-condensing. It supports a universal voltage input of 90 – 265 Vac, with a maximum current of 20 A and a frequency range of 47 – 63 Hz.

Interfaces and Controls: The system includes a remote interface for local and remote control, compatible with other manufacturers' products upon request. Available controls include power adjust, power monitor, interlock, status, current monitor, and run/standby functions.

Compliance and Certification: The system is ISO 9001 certified and complies with various regulatory standards, including UL, CE, and CDRH requirements. Specific standards include EN 50082-1: 1992, EN 55011: 1991, and others.

Physical Specifications: The Model 163D Laser Head measures 12.22 x 5.25 x 6.25 inches and weighs 6.5 lb (2.95 kg). The Model 263D Power Supply measures 11.30 x 6.38 x 3.58 inches and weighs 13.5 lb (6.1 kg).

Additional Features: The system includes patented "Wavelength Selective Mirrors" technology for enhanced power and lifetime. The power supply automatically adjusts to line voltage variations.

Catalog excerpts

PERFORMANCE SPECIFICATIONS1 SERVICES AND OPERATING PARAMETERS1 PRINTED IN THE USA • 6/2001 • PART NUMBER 0453-5770, REV. C 4. Local control is available when the Model 361D Remote Control is attached to the REMOTE INTERFACE connector (25-pin D-sub) on the the power supply. Remote operation is also possible when your own equipment is attached to this connector (Amp No. 206150-1). 5. Interfaces that are compatible with other manufacturer’s product are available upon request. SPECTRA-PHYSICS 163D AIR-COOLED ION LASER SYSTEMS ® LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT ARGON MAXIMUM OUTPUT 0.20 W Common Beam Characteristics Polarization Extinction Ratio > 100:1 (E-vector vertical ± 5°) Longitudinal Mode Spacing (nominal) 638 MHz Beam Waist Location Output of laser head Operating Parameters/Interfaces Plasma Tube Operating Current Limits (nominal) Minimum 4 A Maximum 10 A Services and Equipment Cooling Air Required Laser Head 3.4 m3 (120 CFM) Power Supply 0.68 m3 (24 CFM) Environmental Electric Service Required Temperature Range 4 – 40° C Humidity (noncondensing) 0 – 95% Voltage (Universal Input) 90 – 265 Vac Current 20 A max Frequency 47 – 63 Hz Phase Single Leakage Current 3.5 mA (230 Vac) 2.0 mA (115 Vac) Altitude 0 – 3000 m (0 – 9800 ft) Stability 2 Power At turn on Stability over 2 hours 3 > 95% of stabilized power ± 1% Beam Pointing Angular ± 30 ìrad/±3° C Wavelength Specific Characteristics Wavelength 514 488 458 All Lines Beam Diameter (mm) 0.69 ± 5% 0.69 ± 5% 0.69 ± 5% 0.69 ± 5% Beam Divergence (mrad) (nominal) 0.95 0.95 0.95 0.95 Spatial Mode (TEM00) M2 < 1.2 M2 < 1.2 M2 < 1.2 M2 < 1.2 Power Supply Switching Frequency Nominal 100 kHz Power Supply Overall Efficiency Nominal > 80% Available Interface Provides These Controls 4, 5 Power Adjust Power Monitor Interlock Status (open collector, max. 50 ma) Current Monitor Run/Standby Noise Switching Frequency Synchronous Periodic 1% peak to peak Broadband Periodic (for each single frequency) 10 Hz – 3 kHz < 0.1% rms 10 Hz – 2 MHz < 0.3% rms 3 Hz – 20 MHz 0.1% rms ISO 9001 Certified Compliance has been demonstrated to the following regulatory requirements for UL, CE, and CDRH: EN 50082-1: 1992 EN 55011: 1991 EN 60950: 1993 EN 61000-3-2: 1995 (upon request) EN 61010-1: 1993 73/23/EEC: 1973 89/336/EEC: 1989 FCC Part 15 Class B UL 1950 1. Specifications subject to change without notice. 2. All measurements made in light control mode after a 30-minute warm-up, unless otherwise stated. 3. Stability is measured over any 2-hour period after a 5-minute warm-up. Spectra-Physics 1335 Terra Bella Avenue Mountain View, CA 94043 Tel: 1-800-775-5273 Tel: 1-(650) 961-2550 Fax: 1-(650) 964-3584 e-mail: [email protected] http://www.splasers.com Australia: (61) 8-8443-8668 Belgium: (31) 40 265 99 59 China: (86) 10 6256 2934 France: (33) 1 6918 63 11 Germany: (49) 6151-708300 Hong Kong: (852) 2523-5688 India: (91) 80 6763 465 Israel: (972) 3-6356650 Italy: (39) 02-57465-1 Japan: Tokyo (81) 3-3794-5511 Osaka (81) 6-6941-7331 Netherlands: (31) 40 265 99 59 S. Korea: (82) 2-587-8727 Spain: (34) 91-3775006 Scandinavia: (46) 8-550 10403 Taiwan: (886) 3-426-2376 UK: (44) 1442-258100 Other European Countries: (49) 6151-7080 Other Pacific Countries: 1-650-961-2550

Open the catalog to page 1

SPECTRA-PHYSICS 163D AIR-COOLED ION LASER SYSTEMS The 163D air-cooled ion laser system delivers high power in a compact package design. The small footprint and electrical interface make the 163D compatible with the Uniphase 2011 Air-Cooled Laser System. The plasma tube is based on Spectra-Physics’ proven Metal/BeO tube technology and patented “Wavelength Selective Mirrors,”* which ensures this laser will provide higher power while maintaining exceptional lifetime. The “smart” power supply automatically senses the line voltage and compensates for all variations between 90 – 265 Vac. Model 163D...

Open the catalog to page 2

All MICRO-CONTROLE / Spectra-Physics catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list