Catalogs >
MICRO-CONTROLE / Spectra-Physics >
150 W Low Cost Solar Simulator

150 W Low Cost Solar Simulator
2Pages

Catalog excerpts

194 Phone: 1-800-222-6440 • Fax: 1-949-253-1680 L i g h t S o u r c e s TECHNICAL REFERENCE MONOCHROMATOR AND INCANDESCENT SOURCES ARC SOURCES DEUTERIUM SOURCES CALIBRATION SOURCES FIBER ILLUMINATORS PHOTOLITHOGRAPHY SOLAR SIMULATORS INSTRUMENTS ACCESSORIES FOR ORIEL LIGHT SOURCES 150 W Low Cost Solar Simulator 96000 150 W Solar Simulator with Bifuracted Bundle. The 96000 is intended for the researcher who needs to closely simulate the sun’s spectra, but doesn’t need the high output of our 300 to 1600 W Solar Simulators. The 96000 uses a 150 W ozone free xenon lamp, and produces a 1.3-inch (33 mm) diameter collimated beam. Optional air mass and bandpass filters can be added to re-shape the spectral output. 100 10 1 200 500 1000 1500 2000 2400 WAVELENGTH (nm) IRRADIANCE AT 0.5 (mW m nm ) -2 -1 Fig. 1 Spectral output of 150 W lamp used in Solar Simulator. What Makes Up a 96000 150 W Solar Simulator? The Illuminator Housing The housing includes a rear reflector to collect the back radiation from the lamp, a fan, ignitor, an F/1 condensing lens assembly, and a filter holder. 150 W Xenon Arc Lamp The 96000 Simulator includes a 150 W ozone free xenon lamp. For output below 260 nm, replace this lamp with the 6254 UV enhanced model. Notify a Sales Engineer at time of purchase, if you wish to replace the lamp. The Power Supply The power supply delivers constant power to the lamp, a real advantage over voltage controlled power sources since the low wattage arc lamps have a very narrow power tolerance. The Multiple Filter Holder The 96000 Solar Simulator includes an air mass filter holder, which mounts on the output of the housing's condenser. You can insert and remove the filters without breaking down your system. Note: the blocking and atmospheric attenuation filters (models 59450, 81095 and 81096) may crack if the lamp output is not attenuated. We suggest that you place these filters after a dichroic filter assembly (see page 229) or 1.5-Inch Series Water (see page 238). The Solar Simulator's filter holder can be placed at the output of either of these optical assemblies (See Fig. 2). OPTIONAL FILTERS FILTER HOLDER LAMP HOUSING 77800 LIQUID LIGHT GUIDE COUPLER 77556 LIQUID LIGHT GUIDE Fig. 2 96000 Solar Simulator with optional fiber coupler and light guide • Low cost alternative for low power applications • 1.3-inch diameter collimated output beam • Small arc size allows you to focus image onto fiber optic or liquid light guide • Optional Air Mass Filters, Dichroic Mirrors, and Bandpass Filters let you shape the output spectrum

Open the catalog to page 1

195 Email: sales@newport.com • Web: newport.com L i g h t S o u r c e s TECHNICAL REFERENCE CALIBRATION SOURCES DEUTERIUM SOURCES ARC SOURCES INCANDESCENT SOURCES MONOCHROMATOR AND FIBER ILLUMINATORS SOLAR SIMULATORS PHOTOLITHOGRAPHY INSTRUMENTS ACCESSORIES FOR ORIEL LIGHT SOURCES Output Power Table 1 lists the approximate power in the output beam of the 96000 Solar Simulator (before filtering). We offer formulae and examples for calculating the output power for this lamp housing type (see page 69 ). The multiplication factor for the condenser on this illuminator is 0.11. Table 1...

Open the catalog to page 2

150 W Low Cost Solar Simulator 2Pages

Catalog excerpts

All MICRO-CONTROLE / Spectra-Physics catalogs and technical brochures

150 W Low Cost Solar Simulator
2Pages