Product Specification MICO CAN-bus Keypads Description The MICO CAN-bus keypads interface with MICO MOBEUS ABS/TC/ESC controller for multicolored status indication and operator control. With its simplified design, the keypads save ECU inputs and simplify vehicle wiring. Custom keytop legends and larger form factors are available. The MICO CAN-bus keypads are designed for OffHighway vehicles and fully compatible to the SAE J1939 CAN communication standard. The indicators and legends are dimmable and sealed to IP67. The keys are designed for long life (1,000,000 cycles per key), vibration and impact resistant, and support 12/24 volt systems. MICO is a trademark and registered trademark of MICO, Inc. MICO is registered in the U. S. Patent and Trademark Office as well as in Australia, Canada, Indonesia, Japan, Peoples Republic of China, South Korea, and the European Community. MICO, Incorporated Innovative Braking and Controls Worldwide

MICO CAN-bus Keypads CAN Messages Broadcast Messages PGN Length Description 1.1 2 bits Key 1 (ABS ON/OFF) 1.3 2 bits Key 2 (ABS OFF ROAD) 1.5 2 bits Key 3 (TC ON/OFF) 1.7 2 bits Key 4 (ESC ON/OFF) 2.1 2 bits Key 5 (Brake Pressure Fault) 2.3 2 bits Key 6 (Brake System Fault) 2.5 2 bits Key 7 (General Fault) 2.7 2 bits Key 8 (MOBEUS) 0b00 - Key Not Pressed 0b01 - Key Pressed 0b10 - Error 0b11 - Unused key Same Same Same Same Same Same Same Receive Messages LED Indicator PGN #1 DA - Source Address of the keypad (Default DA-0x80) SA-Source Address of the ECU controlling LEDs 1.1 2 bits Key 1 (ABS...

UNTING INFO t (1mm pitch) rque 25 in-lbs MICO CAN-bus Keypads Panel cut-out geometry for 4x5 and 3x5 keypads. Control / Config Command Messages PGN EF(DA) Prop A PDU1 Start 1.1 DA - Source Address of the keypad (Default DA-0x80) Length Description 1 byte Config / Control Command byte Message dependent Control / Config Commands Indicator Data Source Address Key Press Period Key Press Priority Key Press PGN J1939 Name Fields ECUID Communication Timeout Proprietary LED indicator message allowing 3 different blink rates Change Source Address of Keypad Change Key Press Data Transmission Period Change...

MICO CAN-bus Keypads

MICO CAN-bus Keypads Environmental Specifications ENVIRONMENTAL TESTING STANDARDS PHYSICAL TESTING STANDARDS Operating temperature, High Vibration, Random 2 hours each axis @ 52.4 RMS overall acceleration spectral power density of from 50Hz to 2000Hz Storage Temperature, High Vibration, Sinusoidal A logarithmic sweep from 2000Hz to 10Hz over a p 20 minutes for 4 hours in 3 orthogonal axes with am of 1.5mm from 10Hz to 4 a constant acceleration o RMS from 40Hz to 2000H Thermal Shock -40°C to 70°C at a rate of 4°C/ min (1 hour at extremes) Altitude (Barometric Pressure) Shock / Crash Safety A single...