Product Bulletin Fluid Reservoirs for Direct or Remote Mounting MICO offers two reservoir designs: Polyallomer Reservoir Metal Reservoir ● Translucent for easy view of fluid level ● Rugged anodized aluminum housing ● Diaphragm seals out environmental contaminants ● Easy screw on and off filler cap with baffle and breather ● 3.3 in3 usable fluid capacity ● Adaptable outlet fittings ● Compact design for ease of mounting ● Sediment trap inherent to design ● Adaptable outlet fittings ● Easy screw on and off filler cap ● For use with hydraulic oil and brake fluid (contact MICO regarding phosphate ester fluids) ● 14.5 in3 usable fluid capacity ● For use with hydraulic oil and brake fluid (contact MICO regarding phosphate ester fluids) SPECIFICATIONS Polyallomer Reservoirs Metal Reservoirs Model Number Fluid Type Outlet Fitting Mounting Bracket Diaphragm Number Model Number Fluid Type Mounting Bracket HO = mineral base hydraulic oil BF = DOT 3, 4, 5, and 5.1 brake fluid * Includes two 1/4-27NPTF x 1/4 tube fittings ** Includes 1/8-27NPTF male 90° elbow fitting HO = mineral base hydraulic oil BF = DOT 3, 4, 5 and 5.1 brake fluid

Dimensional Information millimeters inches Diaphragm Material: Diaphragms are available in compounds for use with DOT 3, 4, 5, and 5.1 brake fluid, mineral base hydraulic oil, and most phosphate ester fluids. Filler Cap Design: Polypropolyne filler cap with baffle and breather. Reservoir Construction: Fluid reservoir is made of a high strength, fire retardant translucent polyallomer. Reservoir Construction: Rugged anodized aluminum. Adaptable Fittings Available: a. 9/16-18UNF-2A, which accepts a 37° SAE 3/8 inch tube nut or will thread into a #6 SAE o-ring boss. b. 1/4-18NPTF (internal). This...