2012-2 EDITION MICHELIN SOLUTION EARTHMOVER and PUBLIC WORKS

Earthmover MICHELIN tyres are built to perform HIGH-TECH PRODUCT Machines that use earthmover tyres are involved in most economic activities. The machines are frequently used in difcult or even extreme conditions. Mines, ports, infrastructures, industry - these are all demanding environments which can really put tyres to the test! In response, Michelin is committed to developing ranges of tyres that are suitable for each type of machine and use. The tyres are divided into 8 families, and are constantly being updated to take account of developments in machines and their uses. Key gures Over 200...

Contents TYRE USE 4 to 10 Technology of Michelin radial casing tyres 4 and 5 Classification of earthmover Michelin tyres 6 and 7 Marking of earthmover Michelin tyres 8 Earthmover Michelin tyres TKPH 9 Different earthmover Michelin tyres tread compounds 10 EARTHMOVER TYRES FOR QUARRY AND CONSTRUCTION 11 to 38 Tyres for loaders 11 to 14 Tyres for rigid dump trucks whit payload up to 100 tonnes 15 to 18 Tyres for articulated dump trucks 19 to 22 Tyres for graders 23 to 26 Tyres for cranes and special machines 27 to 30 Tyres for motorised scrapers 31 to 34 Tyres for compactors 35 to 38 EARTHMOVER...

Technology of MICHELIN radial casing tyres A tyre’s construction is the key to its performance, and outstanding tyre performance is a key competitive advantage for transport and working machines in the earthmover industry. Earthmoving equipment can achieve outstanding performance by using radial tyres. Composition The radial design combines metal or fabric plies, extending from one bead to the other, with a belt made of several steel plies designed to reinforce the crown of the tyre. A unique construction with numerous advantages The sidewalls and crown work independently: Minimizing the deformation...

Comparison beetwen bias and radial tyres Bias or diagonal ply construction The casing is made up of several criss-crossed plies. The crown and sidewalls are formed by the same ply structure. The crown is not stabilized. The tread is affected by exing of the sidewalls, resulting in: ฀฀ eformation of the tyre contact area d on the ground ฀฀ ฀ ฀ ฀ ฀ ฀ The casing plies tend to “scissor” in relation to each other Disadvantages: ฀ ฀ ฀ ฀ ฀ ฀ ฀ The MICHELIN X radial The sidewall and tread function separately. The tread is unaffected by the exing of the sidewalls, so there is: The casing has only one...

Classication of MICHELIN tyres According to their aspect ratio The wide diversity of earthmover machines and their uses requires the development of numerous ranges of tyres. Earthmover tyres differ from those mounted on cars or commercial vehicles by: ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ 100 series (standard) 80 series The H/S ratio is approximately 1. ฀ The H/S ratio is approximately 0.80. 100 80 The section width is expressed as a whole number of inches. Examples: 5.00 R 8, 18.00 R 33 Tyres for rigid trucks, handling equipment, etc… The...

According to the standardized usage (ISO-ETRTO-TRA-JATMA*) The four main categories of earthmover tyre are dened by their use. The category to which it belongs is indicated on the sidewall of the tyre. This is an international classication: * ISO: International Standard Organisation ETRTO: European Tyre and Rim TechnicaL Organisation TRA: Tire and Rim Association JATMA: Japan Automobile Tyre Manufactureurs Association C Compactor G Grader E Earthmoving L Loader and bulldozer Within these categories, there are different tread depths and special tread patterns, for very specic uses. These are identied...

Tyre markings Read the sidewall of a tyre to nd out everything about it! MICHELIN XMINED2 1 Nominal section width of the tyre (in inches): 35 2 3 4 2 Tyre series: aspect ratio = 0.65 5 6 1 3 Radial construction: R 7 10 4 Recommended wheel diameter (in inches): 33 8 9 5 Load index of the tyre: ** 6 Type of use: loader (L) with deep tread (5) 7 Radial tyre 11 8 Tyre for loader 9 Tubeless tyre 10 Manufacturer: MICHELIN 11 Tread pattern: XMINED2 MICHELIN X-CRANE MICHELIN XDR2 14 13 12 - Radial construction - Nominal section width of the tyre (in mm): 385 - Tyre series: aspect ratio = 0.95 - Inner...

Earthmover Michelin tyres TKPH ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ tyre, depending of a maximum operating temperature allowable. ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ For the same size and same pattern, there may be several types of tread compound, each associated with a different TKPH. 9

Differents earthmover Michelin tyres tread compounds Particularly resistant to cuts, tread tearing and abrasion on very rough surfaces. Particularly resistant to cuts, tread tearing and abrasion at average speeds which are higher than those for A4 (above). Compromise solution between abrasion resistance and average speed on rough surfaces. Higher resistance to internal heat generation on surfaces which are not particularly rough. Adapted to running on long cycles at high speeds on well-maintained roads. Very high resistance to high average speeds on long cycles run on well-maintained roads. TKPH...

Tyres for loaders Conditions of use of loaders are very diverse, due to the size of machines and the diversity of the tasks assigned to them. The range of MICHELIN tyres for loaders provides you with a solution adapted to your work. 11

Tyres for US E loaders ON AL Highway maintenance CA SI XSNOPLUS FO R OC Maintenance of parks & green spaces INE Rental machine MA CH Building/Public works MULTI PURP OSE XTLA Road building XLD série 65 Infrastructure building sites (roads, railways, canals, dams etc.) XHA2 Logging Recovery of aggregate and other materials SPECI XLD D1 ALIS ACH INE XLD D2 FO Demolition ED M Extraction from quarry or mine face R OD UC TI VE Industrial handling PR Management of waste and recycling US E 12 XMINE D2