The ultrasonic flowmeter in beverage dispensing systems for alcoholic and nonalcoholic drinks. The contact-free flow measurement with no moving parts is wear and maintenance free. The free pipe cross-section over the whole channel geometry meets maximum hygienic requirements. Mechanical and / or chemical cleaning is possible without affecting the meters. Opening the beverage line and the meter can be dropped. The integrated foam monitor with empty pipe messages through alarm output provides additional information. High protection against manipulation and guaranteed long-term stable measurement results. Simple electrical connection with circular connector in IP65 for connection to Flowview2S-N. Flowmax® 30S is an ideal sensor for computer beverage dispensing systems. Housing Material Protection class Medium temperature Measuring range [ml/s] Nominal diameter [DN] Pressure max. Process connection outside thread Dimensions L/W/H in mm Weight in kg Electronics Power supply Electrical connection Outputs Communication Max error of measurement Repeatability 20...30VDC / ca. 2,5W 5-wire cable with plug IP 65, length 5m Digital pulse- and alarm output Serial data bus ±2% Reference conditions (VDI/VDE 2642) < 0,5% Flowmax® 30S: installing and be safe. A very good solution for your beverage dispensing control! Further information: MIB GmbH Bahnhofstr. 35, D-79206 Breisach Tel. 0049 / (0 ) 7667 - 20 777 90 Fax: 0049 / (0 ) 7667 - 20 777 99 Mail: [email protected] Web: www.flowmax.de Technical subjects to be changed! Messtechnik & Industrieberatung