WBR52YT5
2Pages

Mianyang Weibo Electronic Co., Ltd. WBR52YT5 Resistance Input Transmitter (One in and one out) Characteristic  One channel resistance value input, isolated and transmitted, one channel output DC current or voltage. Cooperate with control systems such as DCS/PLC or other unit combination meter applications. Connect to the control system: The AI card of each DCS/PLC receives current or voltage signals. Field devices for connection: two-wire or three-wire resistors. Installation and terminal wiring: 35mm standard DIN rail card mounting; terminal wiring is reed type compression connection. Resistance Input Transmitter The resistance value of the on-site two-wire or three-wire resistor is isolated and converted, and converted into a DC signal linearly related to the input and output to the control system or other smart meter. The resistance input transmitter is powered by a separate DC power supply, and the power supply-input-output is electromagnetically isolated. Power supply Power supply voltage: 20 ~ 30VDC Power indicator: LED power light is green when power is on

Mianyang Weibo Electronic Co., Ltd. Input resistor type: 2-wire or 3-wire resistor (Special resistance potentiometer, user specified when ordering) Output current: 4 ~ 20mA; 0 ~ 20mA; or specified current range Allowable load for current output: 0 to 550 Ω (4 to 20 mA, 0 to 20 mA output) Output voltage: 1 ~ 5V; 0 ~ 5V; 0 ~ 10V; or specified voltage range Voltage output impedance: <500Ω Comprehensive main technical parameters Boot response time: < 1s (10 ~ 90%) Power supply variation: ±0.1% (20~30VDC allowable voltage range) Isolation capability: input-output-power supply 1.5KV, 1min, 50Hz...