Modul Flex
88Pages

{{requestButtons}}

Catalog excerpts

Modul Flex - 2

MODUL-FLEX MODUL-FLEX is a system designed to build conveyors with plastic modular chain for every application. Modular chain conveyors are particularly suitable for handling unpackaged food products or products that require high stability. MODUL-FLEX is a conveyor system that can be adapted to all main brands of modular chains such as Intralox, Habasit and Rexnord MCC. MODUL-FLEX allows to create straight and curved paths for any layout requirement in the following standard sizes:  101 mm, 152 mm, 203 mm ,254 mm, 305 mm and 406 mm for curving and straight paths  508 mm, 609 mm, 711 mm,...

Open the catalog to page 2
Modul Flex - 3

MODUL-FLEX Technical Data* The extreme diversity of applications that Modul-Flex can handle will not allow us to define precise technical specifications: the following data is to be considered as indicative. For a clearer evaluation of the Modul-Flex system, please contact our Technical Office. Product dimensions: 30÷800 mm The geometric shape of the product to be handled influences the maximum width of products accommodated by the system. Maximum product weight: to be evaluated The maximum weight of the product transported is limited to the need to minimize wear and tear of slideways in...

Open the catalog to page 3
Modul Flex - 4

MODUL-FLEX Actual lengths for MODUL-FLEX tracks The following table shows actual layouts of the various components, rounded to the successive 5 mm, in order to determine the quantity of chain needed to make the belt. For curves, the chain length is calculated measuring the path on the longer side of the curve, keeping in mind that the minimum internal radius corresponds to the chain width multiplied by 2.2 (for example, a curve with a chain K8 (203 mm) wide would have a minimum internal radius of 446.6 mm). However, special chains are available to create curves with a lower minimum internal...

Open the catalog to page 4
Modul Flex - 5

MODUL-FLEX Structure of Standard MODUL-FLEX Conveyor A single Modul-Flex conveyor is made up of number of modular blocks that allows to create any type of layout. This catalogue contains the descriptions of all standard modules: - Straight channels (from page 6) Motor drives (from page 24) Return ends (from page 41) Curves (from page 53) Lateral guides (from page 63) Ground supports (from page 72) NOTE: The drawings in this catalogues can be subject to graphical simplifications and therefore may not represent the actual final look of the product. If effective drawings of components are...

Open the catalog to page 5
Modul Flex - 6

MODUL-FLEX Fundamental characteristics of the chain guide channel The Modul-Flex chain guide channel is built from 2 profiles in extruded aluminum joined by spacers of different lengths, depending on the width of the chain that is used. There are 2 different types of profiles for making the external sheets of the channels:  Modular Jolly, with smooth sides, made according to our Jolly-Flex standard  Modular BAT, with grooves that can make it easier to add accessories to the conveyor at any time. Slideways in high molecular weight polyethylene are mounted by snapping the pieces together,...

Open the catalog to page 6
Modul Flex - 7

MODUL-FLEX A complete pre-mounted channel is supplied as follows: Article Number MODUL-FLEX CHAIN GUIDE PROFILE INTERNAL SPACER CENTRAL LOWER GUIDE SUPPORT PROFILE CENTRAL LOWER CHAIN SLIDEWAY INTERNAL SPACER CENTRAL CHAIN SLIDEWAY CENTRAL UPPER CHAIN SLIDEWAY UPPER CHAIN SLIDEWAY

Open the catalog to page 7
Modul Flex - 8

X = Channel width equals to L+44 mm (where L is the effective width of the chain) Y = Height of the chain surface equals to h+131 mm (where h is the effective height of the chain) Ordering: To order the pre-mounted channel, please specify the type of chain you want to use and its width (for this information, see the following pages regarding standard chains), the number of pieces desired and their lengths: the cost of each piece, calculated per meter, will be rounded to the next half meter. An example of an order code for a channel piece could be: Modul-Flex channel with straight Intralox...

Open the catalog to page 8
Modul Flex - 9

MODUL-FLEX Modular Jolly Chain guide profile Material : Anodized aluminum Modular Bat Chain guide profile Material : Anodized aluminum Slideways on forward chain path Material : Depends on the chain type (please, specify it at moment of the order)

Open the catalog to page 9
Modul Flex - 10

MODUL-FLEX Slideways on return chain path Material Central slideway and profile Material : Anodized aluminum : Anodized aluminum

Open the catalog to page 10
Modul Flex - 11

MODUL-FLEX Chain guide channel internal spacers Material : Anodized aluminum : L+12 mm for Modular BAT L+38 mm for Modular Jolly (Where L is the effective width of the chain) : Anodized aluminum (Where L is the effective width of the chain) Order Code: PS2020 NOTE: Aluminum profiles for channels and spacers and polyethlene profiles for slideways are sold in 6 meter bars. Custom cut pieces of profiles can be ordered on request. In this case, the price will be calculated by estimating the length to the next half meter and applying a surcharge for each cut made (please consult the price list...

Open the catalog to page 11
Modul Flex - 12

MODUL-FLEX Modular Jolly channel joining plate Material : Cast aluminum : 10 pieces with bolts Modular BAT channel joining plate Material : Galvanized steel Stainless steel : 50 pieces with bolts Order Code: PG1 Stainless Steel Version: PGX1 __________________________________________________________________ : Galvanized steel : 10 pieces with bolts : Galvanized steel : 10 pieces with bolts

Open the catalog to page 12
Modul Flex - 13

MODUL-FLEX Chains The links of modular belts are made with plastic modules mounted on an interlocking structure, joined with joining pins (also in plastic) and moved by plastic sprockets. Modular chains have all of the qualities required by any operator or designer: resistant to corrosion, positive tow system, great durability, low friction coefficient and resistance to abrasion. Also, a modular system takes less time to clean, reduces down time for maintenance, and quick repairs in case of breakdowns. The Modul-Flex system uses chains made by major manufacturers, with different...

Open the catalog to page 13
Modul Flex - 14

MODUL-FLEX Typical Applications CHOCOLATE CANNED PRODUCTS BAKED PRODUCTS PHARMACEUTICAL FLACONS PRODUCTS IN PLASTIC BLISTER PACKS NOTE: The standard chain models that we have at our disposal are listed below. However, on client request, are available different brands, dimensions, materials and accessories for every type of chain. For more information and evaluation of the best chain model for your needs, please contact our Technical Office.

Open the catalog to page 14

All M.H. Material Handling S.p.A catalogs and technical brochures

  1. MODUL-FLEX

    2 Pages

  2. BAT-Buffer

    2 Pages

  3. Jolly Flex

    72 Pages

  4. BAT L5

    76 Pages

  5. F7

    41 Pages

  6. F6

    41 Pages

  7. BAT F5 ENG

    84 Pages

  8. JOLLYFLEX

    72 Pages

  9. BIFLEX

    77 Pages

  10. BAT-Vertical

    2 Pages

  11. BAT

    2 Pages