BIFLEX
77Pages

{{requestButtons}}

Catalog excerpts

BIFLEX - 2

BIFLEX BIFLEX is a modular system with reduced dimensions suitable for realization of single or double tracks conveyors Biflex system exploits the versatile chain 1843 type that allows reduced dimensions while maintaining high workload and operating speeds. Biflex is a conveyor system that allows to use different types of table-top chains in steel and plastic with a width of 31,8 mm, 38,1 mm and 50,6 mm. Biflex is an Italian product that can offer flexible solutions to a wide range of needs in the product handling process. Biflex was designed to be easy to use, both by plant and machine...

Open the catalog to page 2
BIFLEX - 3

BIFLEX Technical Data* Product dimensions: 20÷500 mm The geometric shape of the product to be handled influences the maximum width of products accommodated by the system. The system can handle products that are up to 5-6 times the chain width, using a double tracks conveyor. In any case, it is better to run trials to find out whether support guides are needed. Maximum product weight: 30 Kg horizontal transport - 15 Kg vertical transport The maximum weight of the product transported is limited to the need to minimize wear and tear of slideways in horizontal transport and flight resistance in...

Open the catalog to page 3
BIFLEX - 4

BIFLEX Actual lengths for BIFLEX tracks The following table shows actual layouts of the various components, rounded to the successive 5 mm, in order to determine the quantity of chain needed to make the belt. For some components, like the curves, the total materials needed are indicated as sums of the individual upper and lower tracks of the curves. Standard curves are made with a straight track of 110 mm on the two ends of the curve itself. The indicated lengths also include this length of track. Therefore, if the track calculation is done by measuring the average distances between curves,...

Open the catalog to page 4
BIFLEX - 5

BIFLEX Structure of standard BIFLEX conveyor A single Biflex conveyor is made up of number of modular blocks that allows to create any type of layout. This catalogue contains the descriptions of all standard modules: - Straight channels (from page 6) Motor drives (from page 12) Return ends (from page 29) Curves (from page 34) Lateral guides (from page 41) Ground supports (from page 63) NOTE: The drawings in this catalogues can be subject to graphical simplifications and therefore may not represent the actual final look of the product. If real drawings of components are necessary to assess...

Open the catalog to page 5
BIFLEX - 6

BIFLEX Fundamental characteristics of the chain guide channel Standard Biflex chain guide channel has a configuration that allows to guide the chain in both forward and return paths. The standard chain guide channel is made with an extruded profile of natural coloured anodized aluminum (12-15 Microns thick). The chain slideways are made in polyethylene with high molecular weight. Guides are mounted by snapping, using the particular shape of the extruded aluminum profile. Then the slideway profile must be fastened with countersunk M4 screws. Channels can be connected together with 4 plates...

Open the catalog to page 6
BIFLEX - 7

BIFLEX Biflex chain guide channel Material : Anodized aluminum NOTE: Channels are sold in bars of 6 meters. Custom cut pieces of channels can be ordered on request. In this case, the price will be calculated by estimating the length to the next half meter and applying a surcharge for each cut made (please consult the price list for details). Aluminum chain channel slideway Material High performance chain slideway Material Order Code: GS1 NS NOTE: Slideways are normally sold in 50/60 meter rolls. Smaller quantities can be ordered on request. The price will be rounded to the next meter.

Open the catalog to page 7
BIFLEX - 8

BIFLEX Channel joining plate Material : Galvanized steel Stainless steel : 50 pieces with bolts Order Code: PG1 Stainless Steel Version: PGX1 Biflex Joining plate Material : Galvanized steel : 2 pieces with screws These joining plates are used to join channels with a maximum slant of 11°. Inspection zone To facilitate the disassembly of the chain, it’s possible to predispose a piece of channel divided in 2: in this way it allows an easy access to the chain junction. This group is called inspection zone and normally is positioned near to the return end, where the chain stress is minimum. Is...

Open the catalog to page 8
BIFLEX - 9

BIFLEX Chains Typical Applications PLASTIC AND GLASS BOTTLES MECHANCAL ELEMENTS AND ELECTRICAL PARTS DOYPACK TYPE SACKS BAGS FOR BISCUITS AND BAKED PRODUCTS PACKAGED CHEESES PRODUCTS IN PLASTIC BLISTER PACKS PHARMACEUTICAL FLACONS PACKAGES FOR RICE, COFFEE AND VACUUM-PACKED PRODUCTS TINS, CANS, AND JARS

Open the catalog to page 9
BIFLEX - 10

BIFLEX Standard chain The Biflex 1843 chain is made with table-top pieces in acetalic resin and teflon snapped together onto a chain of steel rollers: its configuration allows a heavier load and faster speed than the chains with acetalic resin links joined by steel pins. Also, the interlocking movement with sprockets is quieter and allow more precise positioning, due to less play between the chain and the sprocket teeth. The standard chain can be built also in Polycarbonate or WRB resin (wear resistant). On request, stainless steel rollers are also available. Design Colour Specifications...

Open the catalog to page 10
BIFLEX - 11

BIFLEX Chain in resin with flexible flights The Biflex LF 1843 K150 GJ chain is made with tabletop pieces in acetalic resin and teflon snapped together onto a chain of steel rollers. An elastic rubber flight is injection moulded into the chain that allows vertical transport on elevators-lowerators. The rubber of the flights has a standard hardness of 90 Shore A. On request, a hardness of 60 Shore A is available. A version with a square flight , GD model, is also available: the characteristics are the same, but this model is more suitable for the realization of vertical elevators with...

Open the catalog to page 11
BIFLEX - 12

BIFLEX End motor drive The end drive is the most used to make conveyors of any shape with forward and backward paths. The most natural configuration for a conveyor belt is with the motor drive "pulling" the chain. Suspended end motor drive The unit is mounted on the side of the motor and is directly connected to the chain drive sprocket. Technical specifications: Standard motor N° teeth sprocket Standard speed at 50 Hz (m/min) A = Volume depending to the motor gear type

Open the catalog to page 12

All M.H. Material Handling S.p.A catalogs and technical brochures

  1. MODUL-FLEX

    2 Pages

  2. BAT-Buffer

    2 Pages

  3. Modul Flex

    88 Pages

  4. Jolly Flex

    72 Pages

  5. BAT L5

    76 Pages

  6. F7

    41 Pages

  7. F6

    41 Pages

  8. BAT F5 ENG

    84 Pages

  9. JOLLYFLEX

    72 Pages

  10. BAT-Vertical

    2 Pages

  11. BAT

    2 Pages