BAT L5
76Pages

BAT L5 BAT is a modular system designed to make table-top chains conveyors suitable for several different industries. Thanks to the vast range of components, the BAT system makes possible to produce any type of layout, adapting perfectly itself to fit the most complex situations. BAT L5 is a conveyor system that allows to use different types of table-top chains in steel and plastic with a width of 82.5 mm. BAT L5 is an Italian product that can offer flexible solutions to a wide range of needs in the product handling process. BAT L5 was designed to be easy to use, both by plant and machine...

BAT L5 Technical Data* Product dimensions: 20÷500 mm The geometric shape of the product to be handled influences the maximum width of products accommodated by the system. The system can handle products that are up to 5-6 times the chain width, provided that the barycentre of the product is in his centre. In any case, it is better to run trials to find out whether support guides are needed. Maximum product weight: 30 Kg horizontal transport - 15 Kg vertical transport The maximum weight of the product transported is limited to the need to minimize wear and tear of slideways in horizontal...

BAT L5 Actual lengths for BAT L5 tracks The following table shows actual layouts of the various components, rounded to the successive 5 mm, in order to determine the quantity of chain needed to make the belt. For some components, like the curves, the total materials needed are indicated as sums of the individual upper and lower tracks of the curves. Standard curves are made with a straight track of 130 mm on the two ends of the curve itself. The indicated lengths also include this length of track. Therefore, if the track calculation is done by measuring the average distances between curves,...

BAT L5 Structure of standard BAT Conveyor A single BAT conveyor is made up of number of modular blocks that allows to create any type of layout. This catalogue contains the descriptions of all standard modules: - Straight channels (from page 6) Motor drives (from page 14) Return ends (from page 34) Curves (from page 41) Lateral guides (from page 50) Ground supports (from page 61) NOTE: The drawings in this catalogues can be subject to graphical simplifications and therefore may not represent the actual final look of the product. If real drawings of components are necessary to assess space...

BAT L5 Fundamental characteristics of the chain guide channel There are two types of chain guide channels. The first is more frequently used: a chain guide channel used for conveyors with double chain paths (forward and return). The second is a chain guide channel used for building conveyor systems in which there is no chain return, such as in accumulation systems or spiral elevators. In these cases, it is possible to use a specific chain guide channel called SLIM (simple) with reduced height, exactly half of the standard profile. Along with the profile, all of the necessary elements were...

BAT L5 L5 chain guide channel for double tracks (forward and return) Material : Anodized aluminum L5 Chain guide channel Slim for simple tracks (only forward or only return paths) Material : Anodized aluminum NOTE: Channels are sold in bars of 6 meters. Custom cut pieces of channels can be ordered on request. In this case, the price will be calculated by estimating the length to the next half meter and applying a surcharge for each cut made (please consult the price list for details). Aluminum chain channel slideway Material

BAT L5 Channel joining plate Material : Galvanized steel Stainless steel : 50 pieces with bolts Order Code: PG1 Stainless Steel Version: PGX1 L5 Joining plate to change the slope on the double channel Material : Galvanized steel : 2 pieces with screws These joining plates are used to join channels with a maximum slant of 11°. L5 SIim Joining plate to change the slope on the simple channel Material : Galvanized steel : 2 pieces with screws These joining plates are used to join channels with a maximum slant of 11°, in particular in the various transport and/or vertical accumulation system.

BAT L5 Inspection zone To facilitate the disassembly of the chain, it’s possible to predispose a piece of channel divided in 2: in this way it allows an easy access to the chain junction. This group is called inspection zone and normally is positioned near to the return end, where the chain stress is minimum. Is enough to loosen the bolts and scroll the joining plates (only on one side of the inspection zone) to release one piece of lateral side and to access to the chain. Channel section for disassembly, inspection and clearing of the chain and of the conveyor. Including joining plates and...

Typical Applications PLASTIC AND GLASS BOTTLES MECHANCAL ELEMENTS AND ELECTRICAL PARTS DOYPACK TYPE SACKS BAGS FOR BISCUITS AND BAKED PRODUCTS PACKAGED CHEESES PRODUCTS IN PLASTIC BLISTER PACKS PHARMACEUTICAL FLACONS PACKAGES FOR RICE, COFFEE AND VACUUM-PACKED PRODUCTS TINS, CANS, AND JARS

BAT L5 Standard chain The BAT L5 chain is made in acetalic resin and teflon to improve its mechanical characteristics and guarantee a maximum lifetime under heavy conditions (heavy products, long transport paths, high speeds). The low friction coefficient guarantees lower chain tension on the drive shaft and greatly reduces the pulses of the conveyor at low speeds. The chain is designed to work in both directions indifferently. It is suitable for transporting foods and FDA approved. The standard chain can be built also in AS conductive resin (anti-static), polypropylene (resistant to...

BAT L5 Chain in resin with no-slip inserts The BAT HFP L5 chain made in acetalic resin and teflon has the same basic characteristics as the LF. A non-slip rubber insert is injection moulded into the chain that allows transport with slants up to 25°. The rubber in the non-slip inserts has a standard hardness of 60 Shore A. On request, hardnesses of 45 / 90 Shore A are available. The chain is designed to work in both directions indifferently. Design Colour Insert colour : Brown : Light grey Specifications Weight Minimum curve radius Materials Chain Non-slip insert Pin : Acetalic resin and...