Dynamic mergers DU series
1 / 2Pages

MERGERS Dynamic Mergers Compact, wash-down, easy to use and maintain TYPICAL PRODUCTS Thermoformed trays, Fresh Box Boxes and cases Pillow bags, flowpack, doypack DU41M merger positioned at the outlet of a thermoforming machine M.H. developed a solution to fulfill the requirement of merging multiple lines of production into a single one. It’s a unique, compact set of modular chain conveyors integrated in just a single machine. The system is composed by a conveyor for each input line and one output conveyor set up with side-guides or motorized shares to merge products in a single line. via G. Vittorio, 3 20020 Misinto (MI) tel. +39 02 96720176 fax +39 02 96720215 info@mhmaterialhanling.com The unit comes complete with all necessary sensors, electrical cabinet and CE mark. The standard machine is a single structure made of AISI 304 Stainless Steel, easy to connect with any thermo-forming machine as well as with other conveyors in the packaging line Three standard configurations are available: 2 in 1, 3 in 1, 4 in 1. Custom solutions are can be realized on request. The system can be controlled according to two different working principles, depending on the position in which will be placed in the production line: M MODE: The merger is positioned at the outlet of a thermo-forming machine. All products will arrive at the same time in a row every time the machine expels a mould. Launch conveyors will move simultaneously when the machine expel the mould. When products reach the sensor all will be stop and then will start again one by one to send away one line after the other, before the succeeding mould is expelled from the machine. DU41M Merger ejecting products

L MODE: The mergers is positioned in any place of the line and products enter from the different inlet lanes randomly without any control or phasing. In this case the system is controlled by a PLC; a sensor is positioned on each launch conveyor which controls the arrival of the products. The one with the highest delay is the first one to be released on the outlet conveyor, the following will be released after a delay that will allow the correct exit of the preceding one in order to avoid any jam or contact. The system is normally provided with a single set of launch conveyors at the inlet....