1. Catalogs
  2. MGV
  3. PH 15 / PH 30 SERIES

PH 15 / PH 30 SERIES

PH 15 / PH 30 SERIES

PH 15 / PH 30 SERIES

Product catalog summary
Overview: The document provides technical specifications and operational guidelines for the PH 15 and PH 30 series AC/DC power supplies, which are primary switched and single output devices designed for DIN-rail mounting. They offer 15 to 30 watts of output power and feature a wide input voltage range of 94 - 264 VAC.
Specifications:
  • Output Power: 15/30 watts
  • Input Voltage Range: 94 - 264 VAC, 50/60 Hz
  • Efficiency: 77 - 87%
  • Output Voltage Tolerance: +2% / -1%, at 5V + 3%
  • Ripple: < 50 mVss
  • Noise Voltage: < 150 mVss
  • Temperature Coefficient: ≤ 0.025% / K
Protection Features:
  • Overvoltage protection at < 130% of nominal voltage
  • Current limitation between 105 - 200% / 250% of nominal current
  • Output is permanently short-circuit proof
  • Overtemperature protection with automatic restart
Safety and Standards:
  • Complies with IEC 60950 / EN 60950 / VDE 0805
  • UL508 listed, UL 60950
  • CSA 22.2-60950, CSA 22.2-107
EMC Compliance:
  • Interference immunity according to EN61000-6-2
  • Interference emission according to EN61000-6-3
Operating Conditions:
  • Temperature range: 0...70°C with free convection
  • Derating: 2.5% / K at +50°C
  • Weight: 130 g / 150 g
Mechanical Details:
  • Connection: Mains input and load output via plugable terminals
  • Assembly: Snap-on to a symmetrical 35 x 7.5 mm DIN-rail
Installation Notes: Ensure a minimum distance of 20 mm from air openings to surrounding components to prevent overheating. The device should not be used without a protective conductor (PE-connection).
See more

Catalog excerpts

PH 15 / PH 30 SERIES-1

AC / DC POWER SUPPLY PRIMARY SWITCHED ∙ SINGLE OUTPUT PH 15 / PH 30 SERIES ■ 15 / 30 watts output power ■ DIN-rail mounting ■ Wide range input 94 - 264 VAC ■ Output permanent short-circuit proof and SELV according to EN 60950 ■ Overtemperature protection ■ Mains buffering 40 ms ORDER DATA Order numbers Please ensure a distance of approx. 20 mm of the air openings at the top and at the bottom of the device from surrounding. * without UL-Approbation MGV Stromversorgungen GmbH fon: +49 89 678090-0 Bayerwaldstraße 27 • 81737 München • Germany fax: +49 89 678090-80 www.mgv.de [email protected]

 Open the catalog to page 1
PH 15 / PH 30 SERIES-2

AC / DC POWER SUPPLY PRIMARY SWITCHED ∙ SINGLE OUTPUT PH 15 / PH 30 SERIES 1. INPUT Input voltage range Efficiency Input current limitation Internal fuse 6. EMC 94 - 264VAC, 50/60 Hz 77 - 87% ≤ 20 Apeak in cold state ≤ 30 Apeak in hot state 2.5 A flink Interference immunity ESD Burst (input/output) Surge (input/output) 2. output Tolerance of Vonominal Operation indicator Ripple Noise voltage Temperature coefficient Switch on/switch off Rise-delay time Run-up time +2% / -1%, at 5V + 3% green LED < 50 mVss < 150 mVss ≤ 0.025% / K No overshooting of Vo (soft-start) ≤ 0.8 s ≤ 30 ms 3. regulation...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.