P250 series

Product catalog summary

Overview: The document provides technical specifications and operational details for the P 250 Series AC/DC power supply, a primary switched mode power supply with power factor correction (PFC) and single output. It is designed for use in a 19" plug-in module format.

Specifications:

Input: Voltage range of 94 - 264 VAC, 50/60 Hz with power factor correction in accordance with EN 61000-3-2.
Output: SELV compliant according to EN 60950, with permanent short-circuit proof, overtemperature, and overvoltage protection.
Efficiency: Typical efficiency of 80%.
Protection: Overvoltage protection at 125% ±5% of nominal voltage, current limitation at 110% of nominal current, and overtemperature protection with automatic recovery.

Features:

Optional Power-Fail and ACFAIL signals.
Design certification according to EN 60950.
EMC compliance with standards EN 50081-1 and EN 50082-2.

Mechanical Details:

Dimensions: 19" plug-in module according to DIN 41494 Part 5.
Weight: 1.1 kg.
Ventilation: Bottom to top airflow, ensuring unobstructed heat radiation.

Operating Conditions:

Temperature range: 0 to +70°C with derating of 2.5%/K above +50°C.
Power factor correction: Active PFC with regulated, sinusoidal current input (λ > 0.95).

Safety and Compliance:

Safety standards: EN 60950 / VDE 0805, Safety Class I, VDE 0100, CSA NRTL/C / UL 1950 / CSA 22.2-950.
EMC standards: EN 61000-4 series for interference immunity and EN 55011 / EN 55022 Class B for interference emission.

Order Information: Various models are available with different voltage and current outputs, each with optional PF-signal and ACFAIL-signal features.

Additional Components: Front panel and assembly kits for DIN-rail and wall mounting are available.

Catalog excerpts

AC / DC POWER SUPPLY PRIMARY SWITCHED MODE WITH PFC SINGLE OUTPUT P 250 SERIES – 19" plug-in module – Wide range input 94 - 264 VAC with Power factor correction (PFC) in accordance with EN 61000-3-2 – Output SELV according to EN 60950 and permanent short-circuit proof – Overtemperature and overvoltage protection – Optional Power-Fail and ACFAIL signal – Design certification according to EN 60950 w er b e a n st a lt yer L and ge Ba es – EMC Standards EN 50081-1 and EN 50082-2 n ✱ t ge rw ar ac bau ht ✱ prü b ft und ü e 3 TE .. Years Guarantee! 174.43 2.5 100 128.4 80 R 3HE Front panel: 14TE - 70.8 Handle: 14TE ORDER DATA Vo1 V Order numbers in italics Type No. with PF-signal Type No. with ACFAIL-signal 3 P250-05401PF 15.6442.302 P250-05401AC 15.6442.304 14 3 P250-12181PF 15.6442.402 P250-12181AC 15.6442.404 0 - 15 14 3 P250-15151PF 15.6442.502 P250-15151AC 15.6442.504 24 0 - 10 14 3 P250-24101PF 15.6442.602 P250-24101AC 15.6442.604 36 0-6 14 3 P250-36061PF 15.6442.902 P250-36061AC 15.6442.904 48 0-5 14 3 P250-48051PF 15.6442.702 P250-48051AC 15.6442.704 Io1 A Width TE Height HE 5 0 - 40 14 12 0 - 18 15 Additionally: Front panel (nature anodized) Assembly kit for DIN-rail Assembly kit for wall mounting 33.1564.030.011 15.7140.000.190 15.7140.000.290 MGV Stromversorgungen GmbH · Bayerwaldstraße 27 · 81737 München · Germany Tel. +49 / 89 / 67 80 90-0 · Fax +49 / 89 / 67 80 90 80 · Email: [email protected] · Internet: www.mgv.de

Open the catalog to page 1

AC / DC POWER SUPPLY PRIMARY SWITCHED MODE WITH PFC SINGLE OUTPUT P 250 SERIES Fuse OUTPUT Adjustment range Vo Operation indicator Ripple Noise voltage Temperature coefficient Switch on/switch off performance Shut down on/off SD Rise delay time Run-up time REGULATION Line regulation Load regulation Response time EMC Power factor correction EN 61000-3-2: 1995 Class D (PFC) Interference suppression/ EN 50082-2: 1997 interference immunity EN 61000-4-2 Intensity 4 EN 61000-4-3 Noise level 10 V/m EN 61000-4-4 Intensity 4 EN 61000-4-5 Intensity 4 EN 61000-4-11 Interference emission EN 50081-1: 1992...

Open the catalog to page 2

P250 series

P250 series

Catalog excerpts

All MGV catalogs and technical brochures