DC / DC POWER SUPPLY WITH GALVANIC INSULATION SINGLE OUTPUT DG 2, DG 6, DG 10 SERIES

Product catalog summary

Overview: This document provides technical specifications and guidelines for the DG 2, DG 6, and DG 10 series of DC/DC power supplies with galvanic insulation and single output. It includes details on input voltage ranges, output specifications, protection features, and mechanical dimensions.

Specifications:

Input Voltage Ranges: 8.5 - 18 VDC, 18 - 40 VDC, 40 - 80 VDC, 80 - 160 VDC.
Efficiency: Ranges from 70% to 85%.
Fuse Ratings: 6.3 / 4 / 1.6 / 0.8 A for DG 2; graduated for DG 6 and DG 10.
Output Adjustment Range: ±5% with a green LED operation indicator.
Ripple and Noise: Ripple < 15 mVpp for DG 2, < 20 mVpp for DG 6 and DG 10; Noise voltage < 50 mVpp.

Protection and Control:

Overvoltage Protection: Input > 100% of Vimax; Output 125% -10, +5%.
Current Limitation: Typically 110% of nominal current.
EMC Standards: Compliance with EN 50081-1 and EN 50082-2.
Safety Standards: IEC 950, EN 60950, VDE 0805 with insulation voltage of 3000 VAC.

Operating Data:

Temperature Range: 0 to +70°C, with derating of 3%/K at +50°C.
Parallel Operation: Possible with load sharing for DG 6/10.
Weight: 0.30 kg for DG 2, 0.70 kg for DG 6, 1.00 kg for DG 10.

Mechanical Details:

Dimensions: 19'' plug-in module according to DIN 41494 Part 5.
Connection: Plug connector H 15 / DIN 41612 codable.

Additional Features:

Remote on/off capability, parallel connection with load sharing, and compliance with various EMC and safety standards.
Options for ACFAIL / SYSRESET or Power-Fail upon request.

Catalog excerpts

DC / DC POWER SUPPLY WITH GALVANIC INSULATION SINGLE OUTPUT DG 2, DG 6, DG 10 SERIES-1

WITH GALVANIC INSULATION SINGLE OUTPUT Overvoltage protection Output SELV according to EN 60950 and permanent short-circuit proof Remote on/off Parallel connection possible with load VMEbus signals or Power-Fail available upon request ORDER DATA Order numbers in italics Width Height Type No. for input voltage ranges Assembly kit for wall mounting 15.7140.000.290 Fixing clamp for H15 plug connector 35.8529.036.012 8 TE Option for DG 6 / DG 10 up to Vi = 40 V: Device without housing with 7TE 10 TE Option ACFAIL / SYSRESET or PF upon request MGV Stromversorgungen GmbH • BayerwaldstraGe 27 • 81737 Munchen • Germany Tel.+49/89/678090-0 • Fax+49/89/67809080 • Email: [email protected] • lnternetvvww.mgv.de

Open the catalog to page 1

DC / DC POWER SUPPLY WITH GALVANIC INSULATION SINGLE OUTPUT DG 2, DG 6, DG 10 SERIES-2

WITH GALVANIC INSULATION SINGLE OUTPUT Input voltages Insulation voltage Output voltages OPERATING DATA Adjustment range Operation indicator Noise voltage Temperature coefficient Shut down on/off SD (total of all noise components) No overshooting of Vo (soft start) Temperature range Parallel operation Line regulation Load regulation Response time With DG 6 / 10 input voltages < 10.8 V: full load at output admissible for max. 3 Min. For load sharing with DG 6 / 10 connect all pin 6 as shortly as possible. Connect sense lines with the load lines directly at the plug. Ventilation from bottom to...

Open the catalog to page 2