AC / DC POWER SUPPLY PRIMARY SWITCHED Single Output SPH 1013 48V - 72V

Product catalog summary

Overview: The SPH1013 series is a primary switched, single output AC/DC power supply designed by MGV Stromversorgungen GmbH. It offers a compact design with a width of only 66mm and provides 960 watts of output power. The device supports a wide input voltage range and is suitable for IT or Delta mains.

Specifications:

Input: 3 x 340-550VAC, 50/60Hz with efficiency of 90.5% for 48V and 91.5% for 72V.
Output: Voltage ranges from 40-55VDC for 48V and 56-80VDC for 72V. Maximum output power is 1000W with current limits of 20A for 48V and 13.5A for 72V.
Protection: Includes overvoltage, overtemperature, and short-circuit protection. The device automatically switches off if the internal temperature is too high.
Regulation: Line regulation is less than 0.3%, and load regulation is less than 0.5% for single operation.
EMC Compliance: Meets standards EN 61000-6-2, EN 61000-4 series, and EN 55022/11 class B for interference suppression and immunity.
Safety: Complies with EN 60950, VDE standards, and UL standards. It is classified as safety class I with a pollution degree of 2.

Mechanical and Operational Details:

Dimensions for DIN-rail: 66 x 230 x 183 mm; for wall-mounting: 66 x 230 x 177 mm.
Operating temperature range is -25 to +70°C with a derating of 2%/K at +60°C.
Weight is approximately 2.0 kg.
Connection types include main input, load output, and control signals with specified tightening torques.

Additional Features:

Parallel and serial connection capabilities.
Advanced Power Boost feature for enhanced performance.
Operation indicator with green LED for normal operation and red LED for errors.

Installation and Usage: The power supply can be mounted on a DIN-rail or directly on a wall. It is crucial to maintain a minimum distance of 50 mm from surrounding components for proper air circulation. Users are advised to consult MGV user instructions before use.

Catalog excerpts

AC / DC POWER SUPPLY PRIMARY SWITCHED Single Output SPH 1013 48V - 72V-1

PRIMARY SWITCHED • SINGLE OUTPUT ■ 960 watts output power ■ 3 x 340-550VAC wide range input ■ Parallel connection with load sharing ■ Advanced Power Boost ■ Operation in any assembly position ■ Primary and secundary overvoltage Dimensions LxWxH (DIN-rail) Dimensions LxWxH (Wall-mounting) Detailed dimension drawing please see www.mgv.de / 3D-files (.stp) on request ORDER DATAS Order numbers Vo lo Preset range Vo Typ-No. Wall mounting Output voltages 120Vdc (96-130Vdc) and 160Vdc (130-175Vdc) on request Operation in any assembly position possible. The distance between the mission and air exit holes should be at Please ensure that exhaust air is not immediately sucked in again. Bayerwaldstr. 27 • 81737 Munich • Germany I fax: +49 89 678090-80

Open the catalog to page 1

AC / DC POWER SUPPLY PRIMARY SWITCHED Single Output SPH 1013 48V - 72V-2

PRIMARY SWITCHED • SINGLE OUTPUT Input voltage range Input current limitation < 35 Apeak typ. - in cold state intern 3 x 6.3AT, external fuse with 16A to Operation indicator Noise voltage Temperature coefficient Start-up delay Rise time Back feeding voltage Serial connection Parallel connection battery operation boostbreak necessary, see diagram no boostbreak necessary, but the boosttime in the last 4s mustn't be longer a 2s, otherwise a boostbreak 1min is necessary (boostbreak <25ms will be not recognized) yes (max. 2 identical power supplies) yes (max. 3 identical power supplies) after consulting...

Open the catalog to page 2