AC / DC POWER SUPPLY PRIMARY SWITCHED Single output serie Ph 2003

Product catalog summary

Overview: The PH2003 Series is a primary switched, single output AC/DC power supply designed by MGV Stromversorgungen GmbH. It offers a robust 2000 watts output power with a wide input voltage range suitable for IT and Delta-Net applications.

Specifications:

Input: Accepts AC input voltage range of 3x 340-550V at 50/60Hz and DC input of 480-800V. Efficiency ranges from 91-94.5%.
Output: Adjustable output voltage with preset ranges of 23-30V, 42-63V, and 93-99V. Maximum output power is 2000W with overload protection and power-boost capability at 24V output.
Regulation: Line regulation is less than 0.2%, and load regulation is less than 0.6% in single mode.
Protection: Features overvoltage, overtemperature, and current limitation protections. Includes a Power-Good-Signal for operational status.
Safety: Complies with EN 60950, VDE 0805, and UL 508 standards. Safety Class I with IP 20 rating.
EMC: Meets interference suppression and immunity standards such as EN 61000-6-2 and EN 55011.
Operating Data: Operates within a temperature range of 0 to +70°C with a derating of 3%/K over +60°C.
Mechanics: Designed for wall mounting with specific connection requirements for mains input, load output, and control signals.

Recommendations: Ensure a 50mm distance between air-inlet openings and surrounding components to prevent overheating. Fire protection must be ensured by the surrounding housing system.

Additional Notes: The device can be operated in any assembly position and supports parallel connection with load sharing. It is essential to refer to the MGV user instructions before use.

Catalog excerpts

AC / DC POWER SUPPLY PRIMARY SWITCHED Single output serie Ph 2003-1

PRIMARY SWITCHED • SINGLE OUTPUT 2000 watts output power 3x 340-550V wide range input Mains input protected by fuse Output adjustable Parallel connection with load sharing Various monitoring and control signals Primary / secondary overvoltage protection Overtemperature protection Can be operated in any assembly position ORDER DATA ORDER NUMBERS Vo lo Preset range Vo Typ-No. Please ensure a distance of approx. 50 mm between both the air-inlet openings at the front of the housing and surrounding components or surfaces. Also make sure that outgoing air is not sucked back into the device during installation. Bayerwaldstr. 27 • 81737 Munich • Germany I fax: +49 89 678090-80

Open the catalog to page 1

AC / DC POWER SUPPLY PRIMARY SWITCHED Single output serie Ph 2003-2

PRIMARY SWITCHED • SINGLE OUTPUT Input voltage range Input current limitation Ext. DC-Fuse necessary (KLKD 15) < 70 Apeak typ. - in cold state external fuse with 16A to 63A Operation indicator Noise voltage Rise time Parallel connection typ. 60 mVpp / 75 mVpp / 35 mVpp typ. 120 mVpp (band width 20 MHz) Line regulation Load regulation Response time Overvoltage protection Current limitation Ticker operation Mains buffering automatic repeat 105-130%, output perman. short-circuit proof Device switches off if overheated, periodical restart Internal relay changes over at External switch off with Sparking...

Open the catalog to page 2