MIPEX MICROPOWER OPTICAL GAS SENSORSSERIAL PRODUCTSMIPEX-02 [CH4 | CaHa | CO2] Multipurpose optical sensor for industrial safety applications • Low power consumption less than 2mW • Available in metal and plastic 4-series housing • Wide operating temperature range: -40°C to +60°C Ultra-low power sensor in a 4-series housing for portable devices • Power consumption below 0.2 mW • Supply voltage from 2.7 to 5.0V • For propane available high-sensitivity version with 10 ppm resolution A unique solution for portable and wireless gas analyzers • Ultra-low power consumption 0.1 mW • Supply voltage from 2.5 to 5.0V • Optimal solution for IoT systems • Over 10 years of measurement stability High-sensitivity NDIR gas sensor with 10 ppm resolution. Average power consumption less than 0.3 mW Supply voltage from 2.5 to 5V From ± 50 ppm accuracy for methane From ± 30 ppm accuracy for propane Intrinsically safe explosion protection level "ia" Sensors complies with:

Ultra-low power NDIR sensor for portable and battery-powered gas detectors • Thick-pin configuration • Supply voltage from 2.7 to 5.0V • Extended calibration range: Half-height solution for small-sized and portable gas detectors • Power consumption less than 0.2 mW • Height: 10 mm with a base size of 19.9x19.9 mm, enabling minimal device dimensions • Supply voltage: 2.7 to 5V — compatible with most common power sources • Reduced sensor response time (t90) Ready-to-use optical measurement unit for stationary gas detection systems • Power consumption: no more than 2 mW. The best solution for autonomous...