Low power NDIR sensor for industrial safety MIPEX-02 is intended for automatic continuous measurement of methane, hydrocarbons or carbon dioxide concentration in atmosphere of hazardous areas. Technical specifications Parameter Measurement range, % vol. Accuracy (+20…+25⁰C) Response time (T90) sec,with dust filter Operating temperature Humidity tolerance Value 0…2.5,0…5, 0…100 – CH₄ 0…1.5,0…2.5 – C₃H₈ 0…1.5,0…5 – CO₂ ±0.1% vol. or ±5% of reading (whichever is greater) for CH₄ ±0.05% vol. or ±5% of reading (whichever is greater) for C₃H₈ or CO₂ ≤30 – CH₄ or C₃H₈ ≤60 – CO₂ Supply voltage Average current, μA Stainless steel or Polycarbonate Lexan® • Low power consumption – less than 2.0 mW. • Fully digital. • Smart sensor with embedded microcontroller returns linearized, temperaturecompensated output data (-40...+60 °C). • Response time (T90) without dust filter less than 15 seconds. • Industry standard size (⌀20.3×16.6 mm). 5.5 (Polycarbonate Lexan®) 16.6 (Stainless steel) Marking and standards: I M1 / II 1G Ex ia I Ma / Ex ia IIC Ga according to EN IEC 60079-0 / EN 60079-11 C I, Div1, Gr A,B,C,D; C I, Zone 0, AEx ia IIC Ga; Ex ia IIC Ga according to UL 913, CAN/CSA-C22.2 No.157-92 Ex ia I Ma/Ex ia IIC Ga according to IEC 60079-0, IEC 60079-11 • Provides intrinsically safe explosion protection level “ia”. • D

Ultra-low power NDIR sensor for portable and wireless detectors MIPEX-04 is an ultra-low power NDIR sensor for continuous methane and propane detection in portable and wireless safety systems, including gas clip devices and battery-powered analyzers. solution, wireless and clip gas detectors for industrial safety. Housingmaterial Polycarbonate Lexan® • High-sensitivity version with 10 ppm resolution available for propane. • Allows designing clip gas detector lasting no less than 24 months without charge. • Lowest available power consumption among combustible gas sensors. Average operating current...

Ultra-low power infrared ppm range gas sensor MIPEX-04 ppm is a high-performance NDIR sensor with 10 ppm resolution, designed to detect methane and propane at low concentrations. Technical specifications Parameter Measurement range Accuracy (+20…+25⁰C) Response time(T90) sec, with dust filter ±5% of reading (whichever is greater) for CH₄ ±5% of reading (whichever is greater) for C₃H₈ Operating temperature Humidity tolerance Supply voltage Polycarbonate Lexan® Marking and standards: I M1 / II 1G Ex ia I Ma / Ex ia IIC Ga according to EN IEC 60079-0 / EN 60079-11 C I, Div1, Gr A,B,C,D; C I, Zone...

MIPEX-05Ultra-low power sensor in the 4th series housing for portable and wireless devices MIPEX-05 is an ultra-low power infrared gas sensor designed for automatic continuous measurement of methane, hydrocarbons and CO2 concentrations in hazardous areas. Technical specifications Parameter Value Housingmaterial Polycarbonate Lexan® Sensor is designed in compliance with: Features • Ultra-low power consumption. Average current at constant measurement of concentration is less than 60 ^A. • Smart sensor with embedded microcontroller returns linearized, temperature-compensated output data. • LED based...

Ultra-low power sensor with thick-pin configuration for portable and wireless devices MIPEX-06 is an ultra-low power infrared gas sensor designed for automatic continuous measurement of methane, hydrocarbons and CO2 concentrations in hazardous areas. Parameter Value • Ultra-low power consumption. Average current consumption at constant measurement of concentration is less than 60 ^A. • Industry standard size with thick-pin configuration. • Smart sensor with embedded Sensor is designed in compliance with: microcontroller returns linearized, temperature-compensated output data. • LED based dual...

MIPEX-1S is a compact infrared sensor designed for measuring methane, propane, and carbon dioxide concentrations in small-sized and portable gas detectors. Technical specifications tolerance Up to 98% (without condensation) • Ultra-low power consumption. Average current consumption at constant measurement of concentration is less than 65 ^A under normal conditions. • Smart sensor with embedded microcontroller returns linearized, temperature-compensated output data. • LED based dual wavelength technology. Lifetime: more than 10 years. Reduced response time (T90). Housingmaterial Polycarbonate...

An optical measurement module for stationary gas analysis systems with an extended operating temperature range MIPEX-1F – a ready-to-use optical measurement module for industrial safety, designed for automatic continuous monitoring of hydrocarbon concentrations in explosive atmospheres. Technical specifications Parameter 0...2.5 – C₃H₈ ±0.1% vol. or ±5% of reading (whichever is greater) for CH₄ ±0.05% vol. or ±5% of reading (whichever is greater) for C₃H₈ Response time(T90) sec. Operating temperature Humidity tolerance Supply voltage 600 µA (max under normalconditions, UART) Average current Optional:700...