Overview
The document provides technical specifications and features of the JETvarnish 3D with Inline Embossing and Hot Foil Stamping capabilities. It highlights the machine's ability to enhance digital printing with embossing and foil stamping, offering high profitability and ease of use.

Production Speed and Formats
The machine can process up to 1700 B2 sheets per hour or 25 meters per minute. It supports a minimum format of 21 x 30 cm and a maximum of 52 x 105 cm.

Substrate Specifications
Substrate thickness ranges from a minimum of 150 gsm (150 microns) to a maximum of 600 gsm (700 microns). It is compatible with various substrates, including matte or glossy laminated surfaces, layered paper, plastic, and PVC.

Film and Roll Specifications
The machine uses both hot and cold foil films, with an optimization system for film consumption. It supports roll sizes up to 30 cm in diameter and 2000 meters in length, with a minimum width of 10 cm.

Hot Foil Stamping and Embossing
Hot foil stamping is available on surfaces up to 51.5 x 68 cm. Embossing thickness ranges from 6 to 200 microns, with the option to cover metallized film surfaces with varnish.

Compatibility and Requirements
The module connects online with all JETvarnish 3D models. It requires dry air at 6 bar and 87 PSI, with a flow rate of 150-200 L/hour. Electrical requirements are 30 kW at 400 volts.

Dimensions and Weight
The machine measures 2.44 x 1.60 x 1.52 meters and weighs 850 kg.

Additional Features
The iFOIL solution eliminates the need for films and dies, allowing for efficient hot foil stamping and embossing. It supports a range of applications from magazine covers to packaging, offering personalized embossed hot foil finishes.

Contact Information
For Europe, Middle East, Africa, and Russia, contact MGI in France. For America, Caribbean, and Asia Pacific, contact MGI in the USA.