Technical Key Horizontal = feeding direction Vertical = perpendicular to feeding direction Vertical Creasing Up to 4,260 A4 sheets per hour (with 3 finishing functions) Up to 2,280 A3 sheets per hour (with 3 finishing functions) Multiple creasing available with a mininum gap of 2mm. Each tool includes two different creasing widths for a better fit with the various paper thicknesses. 3 steps of creasing strengh • 1 standard tool for a negative creasing (folding on the front side of the sheet). • 1 optional tool for a positive creasing (folding on the back side of the sheet). Paper Feeding Inline feeding from the MGI Digital Press. Connects with the Meteor delivery stream Paper format and thickness Paper format from 105x148 mm up to 375**x1200 mm (from 4.1’’x5.8’’ up to 13’’x47’’) Paper thickness from 70 to 350Gsm (from 20 lb bond up to 130 lb cover/ 14 pt ) Perforating density is 11 teeth per inch (TPI). 17 and 26 TPI available as an option. 3 steps of perforating strengh Meteor High Capacity Stacker • Horizontal direction Up to 4 optional rotary blades with a mininum gap of 30 mm/1.1’’ between each blade. Continue or discontinue perforation fully under user’s control. Programmable by step of 1 mm / 0.04” Standard Finishing tools • Vertical direction 1 optional tool for multiple perforations across the entire width of the sheet. For discontinuous perforation, optional tool for a given perforation length. Top loading stacker from the Meteor press. Laser guided stack adjustment. Capacity of up to 6,000 sheets (80 Gsm/ 22 lb bond) or 600 mm/23’’ paper height • On-board tools 2 rotary blades for horizontal cutting 1 blade for vertical cutting Digital pilot and screen User friendly touch-screen interface (14.5 cm/ 5.7” display) Pre-defined formats Up to 500 user templates • Interchangeable tools 1 interchangeable tool for negative creasing (vertical) Up to two tools can be simultaneously loaded and are automatically detected by the equipment. The unused tool are stored in a parking area with free slots. Electrical requirements Cutting and Trimming** Vouchers Digital Finishing Solution Inline with the Meteor DP8700 XL+ • Trimming 2 standard rotary blades working in the range of 3 to 30mm from each sheet edge (excluding the digital press) Length x width x height : 136 x 81 x 120 cm/53’’x32’’x47’’ ± 258 kg / 568 lbs • Cutting 1 standard interchangeable tool for multiple vertical cuttings (min. 5mm between each cut) One pass Printing and Finishing Operating environment Temperature: 10°C to 30°C - optimal 18°C to 25°C Temperature: 50°F to 86°F - optimal 64°F to 77°F Relative Humidity level: 30 to 70 % - optimal 40 to 60 % RH Book covers Finishing speed will vary according to finishing tools, paper size and digital press used (here an MGI DP8700 XL+) ** For off-line mode *** Max. paper thickness is 300-350 Gsm depending upon substrate used This brochure was printed on the MGI Meteor DP8700 XL+ and cutted, perforated and creased with the Digital Finisher Pro Innovation in Motion Europe/Middle East/Africa/Russia 161, Avenue de Verdun 94204 Ivry-sur-Seine Cedex - FRANCE Tel: +33 (0)1 45 21 06 60 Fax: +33 (0)1 45 21 14 90 [email protected] www.mgi-fr.com @MGI_HQ @MGI_USA facebook.com/MGIonline Pre-launch document All the other trademarks cited are marks registered by their respective manufacturers This is not a contractual document and technical specifications subject to change without notice Americas/Caribbean/Asia Pacific 3143 Skyway Circle Melbourne, FL 32934 - USA Tel: +1 321 751 6755 Fax: +1 321 751 6777 [email protected] www.mgi-usa.com

Digital Finishing Solution Inline with the Meteor DP8700 XL+ Touch Screen Easy and intuitive browsing thanks to a dedicated touch screen. Access to a large predefined format library and the storage and recall of your regular applications. cutting/trimming + creasing + perforating Digital Finisher Pro is the perfect inline finishing solution for your Meteor Digital Press. This option allows you to print and finish all your printed jobs in one pass, saving you both time and money by having professionally printed and finished products ready for delivery. The DF Pro can reach up to 4,260 finished...